| 89413TN Thrust Cylindrical Roller Bearings | Initial grease fill:765.45 g; P120°:72.5 kN; Pa:14 kN; P180°:81.4 kN; Cap bolt recommended tightening torque:1220 N·m; H2:53.975 mm; R1:79.375 mm; H1:133.35 mm; Adapter sleeve assembly:SNW 120x3.5/16; H:258.762 mm; |
| NJ 626 Cylindrical Roller Bearing | Pa:14 kN; P120°:32 kN; PG:1/8 NPT; Cap bolt:2 x 3/4-10 UNC; P90°:51.6 kN; J max.:320.675 mm; RG:3/8 NPT; J min.:269.875 mm; Cap bolt, SAE grade:8; Initial grease fill:181.44 g; |
| Nj208 Bearing | H2:69.85 mm; P60°:234 kN; Da:309.999 mm; Ca:95.809 mm; Appropriate attachment bolt size G:1 in; Housing:SAF 040 KA; P90°:140 kN; R1:115.888 mm; P180°:92.5 kN; Adapter sleeve assembly:SNW 3040x7.1/8; |
| NNU4921/W33 Bearing 105x145x40 | Limiting speed:1900 r/min; Mass bearing:29.5 kg; rb max.:4 mm; Reference speed:1400 r/min; D:320 mm; r3,4 min.:4 mm; T:91 mm; Calculation factor Y0:0.7; Dimension series:4GD; a:77.613 mm; |
| 81111TN Thrust Cylindrical Roller Bearings | Reference speed:18000 r/min; Limiting speed:20000 r/min; Mass needle roller and cage assembly:0.02 kg; Designation associated SD design radial shaft seal with a low cross-sectional height:SD 20x28x4; U:16 mm; Ew:28 mm; Fatigue load limit Pu:2.7 kN; Basic static load rating C0:22.4 kN; Designation associated G design radial shaft seal with a low cross-sectional height:G 20x28x4; Basic dynamic load rating C:19 kN; |
| NN3018 Stainless Steel Cylindrical Roller Bearing | B:40.00 mm; D:110.0000 mm; Basic Dynamic Radial Load Rating C:63700 N; Fillet Radius ra:2.00 mm; Basic Static Radial Load Rating Co:20000 N; d:50.000 mm; Grease Speed Rating n1:5300 rpm; Oil Speed Rating n2:6300 rpm; |
| N215ECP Cylindrical Roller Bearing | B:18.00 mm; Basic Dynamic Radial Load Rating C:35800 N; Fillet Radius rb:0.60 mm; d:65.000 mm; Basic Static Radial Load Rating Co:32500 N; Grease Speed Rating n1:6300 rpm; Fillet Radius ra:1.00 mm; D:100.0000 mm; Oil Speed Rating n2:7500 rpm; |
| NF 328 Cylindrical Roller Bearing | Mass rod end:10.5 kg; Basic static load rating C0:530 kN; l3 min.:80 mm; h1:265 mm; r1 min.:1 mm; Basic dynamic load rating C:315 kN; d4 ≈:92 mm; G:M 72x4; C1 max.:43 mm; l5 ≈:40 mm; |