| No. | Brand | M | l | L | G | J | b | F | t |
| 75x130cm | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 4FT | - | - | - | - | - | - | - | - | - |
| CAS:12125-02-9 | - | - | - | - | - | - | - | - | - |
| 2 | thk | - | - | - | - | - | - | - | - |
| 50 | - | - | - | - | - | - | - | - | - |
| St42 | - | - | - | - | Tr 320x5 | - | - | - | - |
| V6 | - | - | - | - | - | - | - | 16 mm | - |
| 1729X | Bower | - | - | - | - | - | - | - | - |
| 7306BTVP | fag | - | - | - | - | - | - | - | - |
| 6004-2RS | - | - | - | - | - | - | - | - | - |
| 30205STPX1 | NTN | - | - | - | - | - | - | - | - |
| CBR1000 | - | - | - | - | - | - | - | - | - |
| C2062H | - | - | - | - | - | - | - | - | - |
| GE-25-KRRB-AS2/V | INA | - | - | - | - | - | - | - | - |
| 18mm | INA | - | - | - | - | - | - | - | - |
| FZ750 | - | - | - | - | - | - | - | - | - |
| 16mm | - | - | - | - | - | - | - | - | - |
| 7757-82-6 | - | - | - | - | - | - | 22.3 mm | - | - |
| 1mm | - | - | - | - | - | - | - | - | - |
| VW:80,100,200,PASSAT,90,SUPER | - | - | - | - | - | - | - | - | - |
| 5mm | - | - | - | - | - | - | - | - | - |
| NF313 M Bearing | Specific static load factor K0:45 N/mm²; Coefficient of friction µ min.:0.08; d:20 mm; Specific dynamic load factor K:25 N/mm²; Tolerance shaft:e7; Mass bushing:0.079 kg; h:21 mm; Permissible sliding velocity v max.:0.5 m/s; D:28 mm; Coefficient of friction µ max.:0.15; |
| NU232 Cylindrical Roller Bearing | End plug (suffix Y):EPR 3; A2:171.45 mm; Pa:3.4 kN; RG:1/8 NPT; Max. speed for Taconite seal:2175 r/min; R1:38.1 mm; H1:69.85 mm; Initial grease fill:82.215 g; H:134.938 mm; PG:1/8 NPT; |
| N19/500-K-M1-SP Bearing 500x670x78 Mm | Basic Static Radial Load Rating Co:1320000 N; Fillet Radius ra:3.00 mm; B:130.00 mm; Fillet Radius rb:1.00 mm; Basic Dynamic Radial Load Rating C:741000 N; Oil Speed Rating n2:1400 rpm; Grease Speed Rating n1:1200 rpm; d:220.000 mm; D:400.0000 mm; |
| N1917-K-M1-SP Bearing 85x120x18mm | r1,2 min.:4 mm; Calculation factor Y1:4.2; d2 ≈:516 mm; D1 ≈:574 mm; B:118 mm; Mass bearing + sleeve:160 kg; Ba min.:17 mm; Calculation factor Y2:6.3; B2:60 mm; Basic static load rating C0:5000 kN; |
| NUP 2209 ECP Cylindrical Roller Bearing45*100*25mm | Calculation factor f0:14.3; Da max.:101 mm; D2 ≈:99.45 mm; da min.:69 mm; ra max.:1.5 mm; B:22 mm; Mass bearing:0.77 kg; Basic static load rating C0:36 kN; r1,2 min.:1.5 mm; Basic dynamic load rating C:55.3 kN; |
| 314274 B Bearing | b:5.2 mm; B:100 mm; das:172 mm; Snap ring in accordance with DIN 471:225x5; r min.:2 mm; Ca2:77 mm; C2:5.9 mm; +:0.2 mm; Mass bearing:13.5 kg; D3:221 mm; |
| NU2211E Cylindrical Roller Bearing 55*100*25mm | d:30.000 mm; Basic Dynamic Radial Load Rating C:43600 N; D:90.0000 mm; Accessories:Seal & Snap-Ring; Oil Speed Rating Open/Shielded n2:10000 rpm; Sealed Speed Rating n3:5600 rpm; Grease Speed Rating Open/Shielded n1:8500 rpm; B:23.00 mm; Fillet Radius ra:1.50 mm; Basic Static Radial Load Rating Co:23600 N; |
| Four Row Cylindrical Roller Bearing FC3650156/P5 | Grease Speed Rating Open/Shielded n1:7000 rpm; Sealed Speed Rating n3:4800 rpm; Fillet Radius ra:1.00 mm; Accessories:Two Shields; B:20.00 mm; Oil Speed Rating Open/Shielded n2:8500 rpm; Basic Static Radial Load Rating Co:23200 N; d:50.000 mm; Basic Dynamic Radial Load Rating C:35100 N; D:90.0000 mm; |
cylindrical roller bearing catalog tc ylindrical r oller ... - Timken
www.timken.com for the most recent version of the cylindrical roller Bearing catalog. TABLE 1. RADIAL CYLINDRICAL ROLLER BEARING. TYPES AND SIzES
Cylindrical Bearings | The Timken Company
These are the true tests of any bearing. Our comprehensive line of single-, double- and multi-row Timken® cylindrical roller bearings helps extend equipment life
Cylindrical roller bearings
SKF cylindrical roller bearings are available in many designs, series and sizes. The major design differences between the bearings presented in this section are
Cylindrical & Single Row Roller Bearings | AST Bearings
Cylindrical Roller Bearings are bearing in which cylinders are used as the rolling elements as opposed to balls in ball bearings
Cylindrical Roller Bearings - Radial Roller Bearings
Cylindrical Roller Bearings are designed to carry heavy radial loads. These bearings are made with a single row, two rows, or multi-rows of rolling elements to
Cylindrical Roller Bearings | Roller Bearings | Products | NSK
In bearings of this type, the cylindrical rollers are in linear contact with the raceways. They have a high radial load capacity and are suitable for high speeds
Cylindrical Roller Bearings | NTN Bearing
Cylindrical roller bearings have rollers that provide a modified line contact with the cylindrical inner and outer ring raceways, while the rollers are guided by
DC5084N, DC5030NR Full Complement Cylindrical Roller Bearings Video