| NJ313ECP, NJ313E.TVP2, NJ313 Bearing 65x140x33mm | Coefficient of friction µ min.:0.03; Tolerance housing:H7; Permissible sliding velocity v max.:0.5 m/s; D:190 mm; Specific dynamic load factor K:140 N/mm²; Effective load carrying cross section A:20060 mm²; Permissible sliding velocity v min.:0 m/s; Tolerance shaft:h8; B:120 mm; Mass bushing:1.27 kg; |
| Four Row Cylindrical Roller Bearing FC6084240 | d2 ≈:4.6 mm; d:3.175 mm; Da max.:8.3 mm; Calculation factor f0:6.5; da min.:4 mm; r1,2 min.:0.3 mm; Mass bearing:0.0012 kg; da max.:4.5 mm; Limiting speed:63000 r/min; D2 ≈:8.2 mm; |
| NU216 80*140*26mm | Limiting speed:2400 r/min; b1:6 mm; r1,2 min.:1.1 mm; D:150 mm; d1 ≈:125 mm; Basic dynamic load rating C:220 kN; Calculation factor kr:0.25; d:110 mm; Basic static load rating C0:430 kN; Da max.:144 mm; |
| NU2212, NU2212E, NU2212M, NU2212ECP, NU2212ETVP2 Cylindrical Roller Bearing | Limiting speed:360 r/min; d1 ≈:269.2 mm; B:95 mm; Snap ring in accordance with DIN 471:320x6; d:240 mm; b:6.3 mm; Ca2:71 mm; r3,4 min.:1 mm; ra max.:1.5 mm; D:320 mm; |
| NF240M Bearing | S:4.763 mm; P150°:80.1 kN; Max. speed for Taconite seal:590 r/min; Ca:82.804 mm; PG:1/4 NPT; J min.:431.8 mm; h:50.8 mm; Initial grease fill:623.7 g; A2:279.4 mm; Adapter sleeve assembly:SNW 30x5.3/8; |
| NU316, NU316E, NU316M, NU316ECP, NU316-E-TVP2 Cylindrical Roller Bearing | Initial grease fill:481.95 g; End plug (suffix Y):EPR 11; Da:190 mm; Cap bolt recommended tightening torque:515.2 N·m; Taconite seal:TER 188; N1:22.225 mm; Bearing:1318 K; Stabilizing ring:2 x SR-1618; P150°:44.5 kN; J max.:342.9 mm; |
| SL 192305 Cylindrical Roller Bearing | Shaft Diameter D:1 1/2 in; Basic Dynamic Radial Load Rating:5550 lbf; Distance J:3.5000 in; Width A:1.6250 in; Thread Diameter G:1/2-13; Basic Static Radial Load Rating Co:4270 lbf; Insert Bearing IB:Stainless Steel; Dimension H1:1.9375 in; Height H:3.9375 in; Dimension L:4.5000 in; |
| NUP2315, NUP2315E, NUP2315M, NUP2315ECP, NUP2315ETVP2 Cylindrical Roller Bearing | Da min.:148 mm; Fatigue load limit Pu:41.5 kN; a:61.669 mm; d:96.838 mm; C:31.75 mm; da max.:114 mm; rb max.:3.3 mm; r1,2 min.:3.5 mm; Basic dynamic load rating C:348 kN; ra max.:3.5 mm; |