| NJ 310 ECJ Cylindrical Roller Bearing 50*110*27mm | da:138.113 mm; Bearing limiting speed:2800 r/min; h:51.594 mm; P180°:145 kN; P90°:207 kN; A1:158.75 mm; Ca:89.789 mm; Cap bolt:7/8-9 UNC; A2:225.425 mm; End plug (suffix Y):EPR 16; |
| 20 mm x 52 mm x 15 mm N 422M Cylindrical Roller Bearing | B:16 mm; Tolerance housing:H7; Tolerance shaft:h8; d:10 mm; D:16 mm; Specific static load factor K0:20 N/mm²; Permissible sliding velocity v max.:5 m/s; Coefficient of friction µ min.:0.05; Coefficient of friction µ max.:0.1; Mass bushing:0.013 kg; Size (mm):20 mm x 52 mm x 15 mm ; |
| NU2313E Cylindrical Roller Bearing 65*140*48mm | Basic Dynamic Radial Load Rating C:10600 N; Basic Static Radial Load Rating Co:6100 N; Sealed Speed Rating n3:15000 rpm; Oil Speed Rating n2:20000 rpm; Accessories:One Seal; d:10.000 mm; Fillet Radius ra:0.64 mm; Grease Speed Rating n1:15000 rpm; B:19.1 mm; D:35.0000 mm; |
| NU2316E Bearings | Fillet Radius ra:0.30 mm; Basic Static Radial Load Rating Co:4150 N; Accessories:Without Accessories; Sealed Speed Rating n3:7500 rpm; Oil Speed Rating Open/Shielded n2:14000 rpm; B:7.00 mm; d:40.000 mm; Basic Dynamic Radial Load Rating C:4940 N; Grease Speed Rating Open/Shielded n1:11000 rpm; D:52.0000 mm; |
| N1016M/C4 Bearing | Fatigue load limit Pu:17 kN; Basic static load rating C0:140 kN; r min.:0.8 mm; C:25 mm; Fw:45 mm; Reference speed:4500 r/min; D:52 mm; Limiting speed:5600 r/min; Radial shaft seal with a low cross-sectional height, double lip:SD 45x52x4; Basic dynamic load rating C:44 kN; |
| N1072-K-M1-SP Bearing 360x480x56mm | Housing:SAF 318; Appropriate attachment bolt size G:0.75 in; Cap bolt recommended tightening torque:515.2 N·m; H2:50.8 mm; J1:57.15 mm; A2:237.331 mm; Lock nut:AN 18; ba:52.388 mm; P150°:44.5 kN; dc:85.725 mm; |
| NU414 Cylindrical Roller Bearings | Pin Dia A1:0.6875 in; Basic Dynamic Radial Load Rating:5550 lbf; Basic Static Radial Load Rating Co:4270 lbf; Dimension G:0.5625 in; Dimension L:5.5000 in; Dimension C:4.0000 in; Shaft Diameter D:1 1/2 in; Dimension D2:3.4375 in; Dimension H:1.5000 in; Dimension S1:1.1875 in; |
| SL 18 1852 Bearing | d1 ≈:248 mm; K:4 mm; Da max.:288 mm; D1 ≈:268.5 mm; s max.:5 mm; Fatigue load limit Pu:160 kN; Basic dynamic load rating C:737 kN; Basic static load rating C0:1600 kN; d:220 mm; da min.:232 mm; |