| Cylindrical Roller NJ2309ECM Bearing | H1:82.55 mm; A:68.263 mm; A1:95.25 mm; Attachment bolt diameter G:19.05 mm; J max.:223.838 mm; d2:111.125 mm; H2:57.15 mm; L:265.113 mm; B:92.075 mm; Mass bearing unit:9.98 kg; |
| NU2236 Bearing | Basic dynamic load rating C:16.3 kN; Basic static load rating C0:11.2 kN; A5:30.5 mm; A1:15 mm; N:12.3 mm; Mass bearing unit:0.44 kg; Housing material:Composite for food a; Thread grub screw G2:1/4-28 UNF; Recommended diameter for attachment bolts, inch G:0.375 in; Recommended tightening torque for grub screw:4 N·m; |
| NU204M Cylindrical Roller Bearing | b:6 mm; D:80 mm; b1:11 mm; s:1.4 mm; Dynamic (Ca):43 kN; Static (Coa):36.2 kN; B:21 mm; Pu:4.410 kN; d2 (max):51.2 mm; rs (min):1.5 mm; |
| N1010-C-K-PVPA-SP Bearing 50x80x16mm | d:25.000 mm; D:37.0000 mm; Basic Dynamic Radial Load Rating C:4360 N; B:7.00 mm; Grease Speed Rating Open/Shielded n1:17000 rpm; Fillet Radius ra:0.30 mm; Accessories:One Shield; Oil Speed Rating Open/Shielded n2:20000 rpm; Sealed Speed Rating n3:11000 rpm; Basic Static Radial Load Rating Co:2900 N; |
| SL04.5011PP NNF5011 ADA-2LSV Bearings | Grease Speed Rating Open/Shielded n1:2600 rpm; Basic Static Radial Load Rating Co:125000 N; Accessories:Two Shields & Snap-R; Basic Dynamic Radial Load Rating C:125000 N; D:225.0000 mm; d:150.000 mm; Oil Speed Rating Open/Shielded n2:3200 rpm; B:35.00 mm; Sealed Speed Rating n3:1700 rpm; Fillet Radius ra:2.00 mm; |
| HCN1020-K-PVPA-SP-H193 Bearing 100x150x24mm | Mass bushing:0.29 kg; Coefficient of friction µ max.:0.15; Coefficient of friction µ min.:0.08; Permissible sliding velocity v max.:0.5 m/s; Tolerance housing:H7; Tolerance shaft:e7; d:30 mm; Specific static load factor K0:45 N/mm²; B:60 mm; D:40 mm; |
| 502894B 160x230x130 | Sealed Speed Rating n3:3200 rpm; Accessories:One Seal; Grease Speed Rating Open/Shielded n1:5300 rpm; Fillet Radius ra:1.00 mm; Basic Static Radial Load Rating Co:20400 N; B:13.00 mm; D:115.0000 mm; Basic Dynamic Radial Load Rating C:19500 N; d:90.000 mm; Oil Speed Rating Open/Shielded n2:6300 rpm; |
| N226M Bearing 130x230x40mm | C1 max.:48 mm; d:80 mm; Mass rod end:14.5 kg; l7 min.:98 mm; dk:105 mm; d2 max.:182 mm; l2 max.:389 mm; r1 min.:1 mm; B:55 mm; Material constant KM:330; |