| N211 Bearing 55*100*21mm | Basic static load rating C0:1630 kN; T:91 mm; Db min.:294 mm; Dimension series:4GD; a:75.194 mm; D:310 mm; d1 ≈:238.51 mm; r1,2 min.:5 mm; Da min.:259 mm; da max.:196 mm; |
| 529054 Four Row Cylindrical Roller Bearing Fit On Roll Neck | Mass bearing pair:49.1 kg; ra max.:5 mm; Basic dynamic load rating C:1264 kN; l:16 mm; Calculation factor Y0:0.8; Calculation factor Y1:0.81; Fatigue load limit Pu:180 kN; r5 min.:1.5 mm; b:7.5 mm; d1 ≈:220.275 mm; |
| Cylindrical Roller NJ221 Bearing | Basic Dynamic Radial Load Rating C:34500 N; d:70.000 mm; Basic Static Radial Load Rating Co:13700 N; Oil Speed Rating n2:6000 rpm; Grease Speed Rating n1:5000 rpm; Fillet Radius ra:1.50 mm; D:125.0000 mm; B:24.00 mm; |
| NU222E Cylindrical Roller Bearing 110*200*38mm | Fillet Radius ra:1.00 mm; Grease Speed Rating Open/Shielded n1:9800 rpm; D:62.0000 mm; Basic Static Radial Load Rating Co:15600 N; d:25.000 mm; B:17.00 mm; Accessories:One Shield; Basic Dynamic Radial Load Rating C:22900 N; Oil Speed Rating Open/Shielded n2:12000 rpm; |
| 57,15 mm x 104,775 mm x 29,317 mm Cylindrical Roller Bearing NU305E | Eye bolt:2 x 1/2-13 UNC; A2:276.225 mm; H2:79.375 mm; P150°:136 kN; H:400.05 mm; PG:1/4 NPT; H1:200.025 mm; P60°:416 kN; Stabilizing ring:2 x 36053-140; Da:339.999 mm; Size (mm):57,15 mm x 104,775 mm x 29,317 mm ; |
| FC3248145 Bearing | Basic Dynamic Radial Load Rating C:182000 N; d:80.000 mm; D:170.0000 mm; Oil Speed Rating n2:3400 rpm; B:68.30 mm; Basic Static Radial Load Rating Co:156000 N; Sealed Speed Rating n3:2400 rpm; Fillet Radius ra:2.00 mm; Accessories:No Shield, no Seal; Grease Speed Rating n1:2400 rpm; |
| NU418 Cylindrical Roller Bearing 90*225*54mm | J min.:441.325 mm; Labyrinth ring:2 x LOR 131; L:558.8 mm; S:4.763 mm; Cap bolt recommended tightening torque:203.4 N·m; N1:28.575 mm; Pa:38.5 kN; P180°:94.3 kN; PG:1/4 NPT; J1:95.25 mm; |
| NU1928 Cylindrical Roller Bearing | Tolerance shaft:h8; Tolerance housing:H7; D:10 mm; d:6 mm; Coefficient of friction µ min.:0.05; Permissible sliding velocity v min.:0.25 m/s; Coefficient of friction µ max.:0.1; B:4 mm; Permissible sliding velocity v max.:5 m/s; Mass bushing:0.001 kg; |