| NU428M Bearing | d1 ≈:28.8 mm; D2:46.56 mm; Limiting speed:10000 r/min; Fatigue load limit Pu:0.28 kN; C:2.46 mm; d:20 mm; r0:0.4 mm; db min.:25 mm; ra max.:1 mm; D1 ≈:40.6 mm; |
| SL024944 Cylindrical Roller Bearings SL Series | Stabilizing ring:SR-17-14; Housing:SAFS 217; P90°:47.2 kN; S:4.763 mm; Mass pillow block:23.6 kg; P120°:28.9 kN; Cap bolt recommended tightening torque:298.3 N·m; RG:3/8 NPT; A1:88.9 mm; L:330.2 mm; |
| NNF 5011 , SL045011 Full Complete Cylindrical Roller Bearing | Oil Speed Rating Open/Shielded n2:5300 rpm; d:60.000 mm; Basic Static Radial Load Rating Co:78000 N; D:130.0000 mm; Fillet Radius ra:2.00 mm; Grease Speed Rating Open/Shielded n1:4300 rpm; Basic Dynamic Radial Load Rating C:91300 N; B:31.00 mm; Accessories:One Shield & Snap-Ri; |
| NF224M Bearing 120x215x40mm | Reference speed:1100 r/min; Basic dynamic load rating C:605 kN; Da max.:389 mm; Mass bearing:23 kg; Basic static load rating C0:1900 kN; ra max.:2 mm; d:320 mm; D:400 mm; B:80 mm; r1,2 min.:2.1 mm; |
| 508955 Four Row Cylindrical Roller Bearing | r1 max.:0.4 mm; r2 max.:0.6 mm; Lw:7.8 mm; Dw:1.5 mm; r1,2 min.:0.1 mm; Mass needle roller:0.108 g; |
| NJ2326M/P6 Elrctrical Cylindrical Roller Bearing | d:60.000 mm; Accessories:One Seal & Snap-Ring; B:36.50 mm; Sealed Speed Rating n3:3800 rpm; Fillet Radius ra:1.50 mm; Oil Speed Rating n2:5000 rpm; Grease Speed Rating n1:3800 rpm; D:110.0000 mm; Basic Static Radial Load Rating Co:88000 N; Basic Dynamic Radial Load Rating C:78100 N; |
| NU 2208 NU2208M Cylindrical Roller Bearing | Oil Speed Rating n2:10000 rpm; d:25.000 mm; Basic Dynamic Radial Load Rating C:34100 N; Accessories:One Shield; B:25.40 mm; Grease Speed Rating n1:7500 rpm; D:62.0000 mm; Sealed Speed Rating n3:7500 rpm; Fillet Radius ra:1.00 mm; Basic Static Radial Load Rating Co:30500 N; |
| NU1928 Cylindrical Roller Bearing | Tolerance shaft:h8; Tolerance housing:H7; D:10 mm; d:6 mm; Coefficient of friction µ min.:0.05; Permissible sliding velocity v min.:0.25 m/s; Coefficient of friction µ max.:0.1; B:4 mm; Permissible sliding velocity v max.:5 m/s; Mass bushing:0.001 kg; |