| Four Row Cylindrical Roller Bearings 314049A | Basic Dynamic Radial Load Rating C:130000 N; Basic Static Radial Load Rating Co:120000 N; Sealed Speed Rating n3:2400 rpm; Oil Speed Rating n2:3400 rpm; Accessories:One Shield & Snap-Ri; Grease Speed Rating n1:2400 rpm; B:52.40 mm; d:90.000 mm; D:160.0000 mm; Fillet Radius ra:2.00 mm; |
| NUP2334M Bearing | d:150 mm; D:165 mm; Tolerance shaft:h8; Specific dynamic load factor K:140 N/mm²; Effective load carrying cross section A:22200 mm²; Tolerance housing:H7; Coefficient of friction µ min.:0.03; Permissible sliding velocity v min.:0 m/s; B:150 mm; Mass bushing:1.04 kg; |
| NNU3024x1 Bearing 120x180x52mm | Calculation factor e:0.35; Basic dynamic load rating C:4290 kN; Comparative radial load rating CF:1060 kN; r3,4 min.:6.4 mm; B:196.85 mm; Calculation factor Y1:1.9; d:558.8 mm; Design variant/feature:TDI/GWIY2; D:736.6 mm; Comparative axial load rating CFa:355 kN; |
| SL 182926 Bearing | d:45 mm; a:16.1 mm; C2:2.8 mm; Mass bearing:0.13 kg; Calculation factor f0:9.7; Static axial stiffness, preload class A:28 N/µm; da min.:48.2 mm; Preload class A GA:24 N; Calculation factor f1:1; Calculation factor f:1.08; |
| N 240 Generators Bearing | da:410 mm; H2:125 mm; Locating ring:2 x FRB 21.5/650; End cover:ETS 88; P90°:4200 kN; A1:390 mm; s:30 mm; bb:155.5 mm; Ca:200 mm; N1:48 mm; |
| Cylindrical Roller Bearing N 407 E | Grease Speed Rating n1:1200 rpm; Fillet Radius rb:1.50 mm; Fillet Radius ra:4.00 mm; Basic Dynamic Radial Load Rating C:650000 N; Basic Static Radial Load Rating Co:1220000 N; d:320.000 mm; B:92.00 mm; D:580.0000 mm; Oil Speed Rating n2:1500 rpm; |
| NJ2307E Bearing | L:193.675 mm; S:0.794 mm; A6:26.988 mm; N1:20.637 mm; A5:38.1 mm; Basic dynamic load rating C:212 kN; s:31.75 mm; J:152.4 mm; Limiting speed:2800 r/min; Mass bearing unit:12.2 kg; |
| NU2314 Bearing 70*125*31mm | α:124 °; Coefficient of friction µ max.:0.15; Coefficient of friction µ min.:0.08; d:230 mm; B:140 mm; D:250 mm; Specific static load factor K0:45 N/mm²; Specific dynamic load factor K:25 N/mm²; Tolerance housing:H7; h:232.5 mm; |