| Cylindrical Roller Bearing N303E NJ303E NU303E | D:110.0000 mm; Basic Static Radial Load Rating Co:17000 N; Fillet Radius ra:1.50 mm; B:28.00 mm; Oil Speed Rating n2:6300 rpm; Grease Speed Rating n1:5300 rpm; Basic Dynamic Radial Load Rating C:48800 N; d:60.000 mm; |
| Cylindrical Roller NJ2212E.M1.C3 Bearing | Fillet Radius ra:3.00 mm; Basic Static Radial Load Rating Co:1340000 N; B:136.00 mm; d:230.000 mm; Fillet Radius rb:1.00 mm; Oil Speed Rating n2:1500 rpm; D:420.0000 mm; Basic Dynamic Radial Load Rating C:715000 N; Grease Speed Rating n1:1200 rpm; |
| Full Complete Cylindrical Roller Bearing NCF2930V | Grease:0.850 kN; B:33 mm; Pu:20.000 kN; with cylindrical bore:5 300 min-1; B1:mm; with tapered bore:2216 ; rs Dynamic (Cr):2 mm; Static (Cor):50.470 kN; Oil:4 500 min-1; D:140 mm; |
| NU430M Bearing | d:150 mm; Hydraulic nut:HMV 30 E; Mass adapter sleeve assembly:4.2 kg; B4:26 mm; d3:180 mm; G:M 150x2; B1:87 mm; d1:131.762 mm; B:24 mm; Locking device:MBL 30; |
| NU205 Bearing 25X52X15mm | Basic dynamic load rating C:483 kN; Ca min.:6 mm; Limiting speed:5300 r/min; Da max.:119.5 mm; Da min.:107 mm; K:6 mm; Calculation factor Y1:1.9; Calculation factor Y2:2.9; 2B:92 mm; d:60 mm; |
| NJ18/800 NH18/800M Bearing 800x980x82mm | Sealed Speed Rating n3:2200 rpm; B:18.00 mm; Fillet Radius ra:1.00 mm; Basic Dynamic Radial Load Rating C:37700 N; Grease Speed Rating Open/Shielded n1:3600 rpm; D:165.0000 mm; Accessories:Two Shields; d:130.000 mm; Oil Speed Rating Open/Shielded n2:4300 rpm; Basic Static Radial Load Rating Co:43000 N; |
| NAS5014 Cylindrical Roller Bearing | a:293 mm; Thrust factor K:1.54; Design variant/feature:TDO/D; Basic static load rating C0:9650 kN; r3,4 min.:1.5 mm; Comparative radial load rating CF:915 kN; Comparative axial load rating CFa:344 kN; r1,2 min.:6.4 mm; Fatigue load limit Pu:670 kN; D1 ≈:877 mm; |
| SL014838 Bearing | Appropriate attachment bolt size G:0.75 in; P60°:185 kN; Taconite seal:TER 121; da:123.825 mm; Max. speed for Taconite seal:625 r/min; Mass pillow block:62.6 kg; H:258.762 mm; Stabilizing ring:2 x 36053-50; N1:22.225 mm; P180°:81.4 kN; |