| 7015C-2RS/P4 Engraving Machine Bearing | Outer Diameter (mm):812,8; T:190,5 mm; Bearing number:EE743240/743321D+A; D:812,8 mm; Size (mm):609.6x812.8x190.5; d:609,6 mm; Bore Diameter (mm):609,6; Brand:NTN; Width (mm):190,5; |
| 7008C-2RS/P4 Engraving Machine Bearing | Bearing number:75BER19H; Da max.:99 mm; Width (mm):16; r1 min.:0,6 mm; Size (mm):75x105x16; r min.:1 mm; A:85 mm; Basic dynamic load rating (C):20,7 kN; Angle (α):25 °; Outer Diameter (mm):105; |
| 7019C-2RS/P4 Engraving Machine Bearing | Size (mm):35.5x76.2x29.37; D:76,2 mm; d:35,5 mm; Bearing number:HM89449/410; Bore Diameter (mm):35,5; Brand:SNR; Outer Diameter (mm):76,2; Width (mm):29,37; |
| 7003C-2RZ DT P4 Engraving Machine Bearing | f1:1,4 mm; Brand:CX; f2:0,7 mm; d:105 mm; Outer Diameter (mm):110; θ:9,5 mm; D:110 mm; L:80 mm; Bore Diameter (mm):105; Bearing number:TUP2 105.80; |
| H7005C-2RZ DT P4 Engraving Machine Bearing | maximum rpm:15000 RPM; Snap Ring:Yes; finish/coating:Uncoated; inner ring width:13 mm; Category:Single Row Ball Bear; Other Features:Deep Groove | With S; Noun:Bearing; Weight / Kilogram:0; static load capacity:8300 N; |
| 7002C/P4 Engraving Machine Bearing | Seal Type:Kevlar Packing Seal; Bearing - Housing - Seal:HSE2000BRHKPS; Dimension H:24.488 in; Pillow/Plummer Block Style:Split Cylindrical Ho; Note:This product line wa; Dimension J1:50.0 in; Bearing Type:Split Cylindrical Re; Support Type:Eight-Bolt Plummer B; Maximum Speed:310 rpm; Dimension H1:4.0 in; |
| 7016C-2RS/P4 Engraving Machine Bearing | h:33 mm; l2 max.:44 mm; dk:11,1 mm; Thread (G):M5 Tolerance 6g; Bearing number:SAKB5F; Angle:13 °; d2 max.:19 mm; Brand:SKF; r1 min.:0,3 mm; d:5 mm; |
| 7004C-2RZ DT P4 Engraving Machine Bearing | Seal Type:Felt Type; Dimension K :4-1/4 in; Dimension M :6-3/4 in; Dimension L :24-3/4 in; Cor - Static Load Rating:232600 lbf; Note:This product line wa; Bearing Number:MSE514BR; Shaft Size:5.875 in; Support Type:Four-Bolt Plummer Bl; Bolt Size:4 x 1; |