| Cylindrical Roller Bearing N 308 E | Tolerance housing:H7; d:16 mm; Specific dynamic load factor K:10 N/mm²; Permissible sliding velocity v max.:5 m/s; Specific static load factor K0:20 N/mm²; Coefficient of friction µ max.:0.1; Mass bushing:0.009 kg; Coefficient of friction µ min.:0.05; Tolerance shaft:h8; D:20 mm; |
| NUP 2209E Cylindrical Roller Bearing | Grease:265 kN; with tapered bore:2 500 min-1; Oil:30.220 kN; Static (Cor):8.3 mm; Dynamic (Cr):4.5 mm; Pu:209 kN; B:40 mm; d:90 mm; with cylindrical bore:2 000 min-1; rs (min):2 mm; |
| FC202870/YA3 Mill Four Row Cylindrical Roller Bearing 100x140x70mm | Designation associated G design radial shaft seal with a low cross-sectional height:G 15x21x3; Reference speed:24000 r/min; Fatigue load limit Pu:2 kN; U:15 mm; Mass needle roller and cage assembly:0.011 kg; Limiting speed:26000 r/min; Basic dynamic load rating C:13.8 kN; Ew:21 mm; Fw:15 mm; Designation associated SD design radial shaft seal with a low cross-sectional height:SD 15x21x3; |
| NJ322 E/EMC3 Cylindrical Roller Bearing | Mass pillow block:52.2 kg; H2:50.8 mm; Cap bolt recommended tightening torque:298.3 N·m; P150°:59.6 kN; Stabilizing ring:SR-22-19; N1:22.225 mm; Eye bolt:2 x 3/8-16 UNC; H:239.316 mm; P120°:66.7 kN; J max.:368.3 mm; |
| NU321ECMC3, NU321E.M1.C3, NU321G1C3 Bearing 105X225X49mm | Fillet Radius ra:1.50 mm; Fillet Radius rb:1.00 mm; B:46.00 mm; D:90.0000 mm; Basic Dynamic Radial Load Rating C:88400 N; d:30.000 mm; Basic Static Radial Load Rating Co:68000 N; Oil Speed Rating n2:8000 rpm; Grease Speed Rating n1:6200 rpm; |
| NJ2309, NJ2309E, NJ2309M, NJ2309ECP, NJ2309ETVP2 Cylindrical Roller Bearing | Fatigue load limit Pu:153 kN; b1:7 mm; das:157 mm; K:4 mm; da min.:151 mm; Limiting speed:1800 r/min; Basic static load rating C0:1370 kN; rb max.:1 mm; Da max.:200 mm; Reference speed:1400 r/min; |
| NN3021KTN9/SPW33 Cylindrical Roller Bearing 105x160x41mm | Fillet Radius ra:1.00 mm; Grease Speed Rating Open/Shielded n1:5700 rpm; B:20.00 mm; Basic Dynamic Radial Load Rating C:39100 N; D:90.0000 mm; Basic Static Radial Load Rating Co:34500 N; d:50.000 mm; Accessories:Two Shields; Oil Speed Rating Open/Shielded n2:7000 rpm; |
| NU18/1180 Cylindrical Roller Bearing | d:240.000 mm; Accessories:Seal & Snap-Ring; Basic Static Radial Load Rating Co:315000 N; Basic Dynamic Radial Load Rating C:255000 N; Grease Speed Rating Open/Shielded n1:1700 rpm; Oil Speed Rating Open/Shielded n2:2000 rpm; Fillet Radius ra:2.50 mm; D:360.0000 mm; B:56.00 mm; Sealed Speed Rating n3:1000 rpm; |