| H7004C-2RZ DT P4 Engraving Machine Bearing | Brand:KOYO; Size (mm):60x95x18; Bore Diameter (mm):60; r1 min.:0,6 mm; Basic dynamic load rating (C):23,7 kN; Bearing number:3NCHAC012CA; (Grease) Lubrication Speed:18 000 r/min; r min.:1,1 mm; Outer Diameter (mm):95; B:18 mm; |
| 7014C-2RS/P4 Engraving Machine Bearing | Calculation factor - f2B:1.07; d2:18.9 mm; r3,4 - min.:0.2 mm; Bore Diameter (mm):28; Calculation factor - Y0:0.76; Preload class A:44 N/micron; Preload class B:57 N/micron; Calculation factor f2D:1.17; Calculation factor - f2C:1.12; |
| 95 mm x 145 mm x 24 mm 7000C-2RZ DT P4 Engraving Machine Bearing | Bearing number:M-1481; D:28,575 mm; Width (mm):12,7; Basic dynamic load rating (C):15,4 kN; (Grease) Lubrication Speed:3100 r/min; Size (mm):95 mm x 145 mm x 24 mm ; Weight:0,022 Kg; Brand:Timken; Fw:22,225 mm; Outer Diameter (mm):28,575; |
| 7002C/P4 Engraving Machine Bearing | Seal Type:Kevlar Packing Seal; Bearing - Housing - Seal:HSE2000BRHKPS; Dimension H:24.488 in; Pillow/Plummer Block Style:Split Cylindrical Ho; Note:This product line wa; Dimension J1:50.0 in; Bearing Type:Split Cylindrical Re; Support Type:Eight-Bolt Plummer B; Maximum Speed:310 rpm; Dimension H1:4.0 in; |
| 7005C-2RZ DT P4 Engraving Machine Bearing | Average Clearance (Cd):0.0950; Shaft Dia., Nominal (d):65.0000; Housing Bore Dia. (Dh):70 +0.030 / +0; Outer Diameter (mm):70; Bearing Bore after Mounting (di):65.11 / 64.99; Material:Bronze shell with PT; Bearing number:AST11 6540; OD Chamfer Length (Co):1.800; Bearing Length Tolerance (B tol.) - +0 / -0.40:+0 / 0.40; Bearing Outside Diameter Tolerance (Do tol.):70.1 / 70.055; |
| 7019C-2RS/P4 Engraving Machine Bearing | Size (mm):35.5x76.2x29.37; D:76,2 mm; d:35,5 mm; Bearing number:HM89449/410; Bore Diameter (mm):35,5; Brand:SNR; Outer Diameter (mm):76,2; Width (mm):29,37; |
| 7018C-2RS/P4 Engraving Machine Bearing | d1:323 mm; D:380 mm; Outer Diameter (mm):380; Bore Diameter (mm):280; Basic dynamic load rating (C):862 kN; d:280 mm; Bearing number:29256 M; Weight:19,5 Kg; T:60 mm; C:30 mm; |
| 7003C-2RZ DT P4 Engraving Machine Bearing | f1:1,4 mm; Brand:CX; f2:0,7 mm; d:105 mm; Outer Diameter (mm):110; θ:9,5 mm; D:110 mm; L:80 mm; Bore Diameter (mm):105; Bearing number:TUP2 105.80; |