| NU2206 Bearing 30X62X20mm | Fillet Radius ra:1.00 mm; Oil Speed Rating n2:11000 rpm; Fillet Radius rb:0.60 mm; D:72.0000 mm; B:19.00 mm; Basic Static Radial Load Rating Co:20000 N; d:30.000 mm; Grease Speed Rating n1:9000 rpm; Basic Dynamic Radial Load Rating C:31200 N; |
| FC3246180A Bearing | r, r1,2 min.:0.3 mm; F:20 mm; B:16 mm; d:17 mm; Mass inner ring:0.011 kg; |
| N1856X3M/HG2P6-1 Bearing | r2 min.:0.6 mm; Basic dynamic load rating C:93 kN; Sealing solution:Triple-lip seals; b1:3.1 mm; Specific dynamic load factor K:150 N/mm²; Basic static load rating C0:310 kN; Da max.:44 mm; Design (sliding contact surface combination):Steel/steel; Material constant KM:330; rb max.:0.6 mm; |
| FAG 81216LPB Bearing | A2:127 mm; J min.:250.825 mm; ba:35.719 mm; PG:1/8 NPT; RG:3/8 NPT; Ca:45.796 mm; End plug (suffix Y):EPR 9; Bearing limiting speed:5600 r/min; Cap bolt:2 x 5/8-11 UNC; Appropriate attachment bolt size G:0.625 in; |
| NU1052 Bearing 260*400*65mm | T:20 mm; da max.:82 mm; a:18.607 mm; Reference speed:4800 r/min; Basic dynamic load rating C:86.8 kN; Dimension series:2BC; d:75 mm; Limiting speed:5600 r/min; r3,4 min.:1 mm; Fatigue load limit Pu:13.2 kN; |
| NJ218, NJ218E, NJ218M, NJ218ECP, NJ218-E-TVP2 Cylindrical Roller Bearing | l3 min.:19 mm; Basic static load rating C0:51 kN; G:M 14x1.5; d2 max.:55 mm; N1 max.:17 mm; Basic dynamic load rating C:30 kN; h1:58 mm; d4 max.:25 mm; dk:29 mm; Tightening torque bolt with internal hexagon:25 N·m; |
| NU1014, NU1014E, NU1014M, NU1014ECP,NU1014M1 Cylindrical Roller Bearing | D:72.0000 mm; Grease Speed Rating n1:9000 rpm; Fillet Radius ra:1.00 mm; Basic Static Radial Load Rating Co:6800 N; d:30.000 mm; Oil Speed Rating n2:11000 rpm; B:19.00 mm; Basic Dynamic Radial Load Rating C:22500 N; |
| 40 mm x 90 mm x 23 mm NNU3028 Bearing 140x210x53mm | with tapered bore:630 min-1; rs (min):6 mm; Dynamic (Cr):12 mm; Oil:525.760 kN; B:157 mm; Grease:7170 kN; Pu:3500 kN; D:650 mm; d:440 mm; with cylindrical bore:500 min-1; Size (mm):40 mm x 90 mm x 23 mm ; |