| NJ 1030 M/C3 Cylindrical Roller Bearing | Eye bolt:2 x 3/8-16 UNC; H:336.55 mm; Ca:89.789 mm; PG:1/4 NPT; P180°:94.3 kN; da:176.213 mm; P150°:78.3 kN; Stabilizing ring:2 x 38151-38; J max.:488.95 mm; Max. speed for PosiTrac Plus seal:825 r/min; |
| NCF 28/800V Full Complete Cylindrical Roller Bearing | d:300.000 mm; Grease Speed Rating Open/Shielded n1:1300 rpm; Fillet Radius ra:3.00 mm; D:420.0000 mm; Sealed Speed Rating n3:800 rpm; Basic Dynamic Radial Load Rating C:270000 N; Accessories:Two Shields; Oil Speed Rating Open/Shielded n2:1600 rpm; B:56.00 mm; Basic Static Radial Load Rating Co:375000 N; |
| NU207 Bearing 35x72x17mm | U:20 mm; Limiting speed:8500 r/min; Ew:63 mm; Designation associated G design radial shaft seal with a low cross-sectional height:G 55x63x5; Mass needle roller and cage assembly:0.067 kg; Basic dynamic load rating C:38 kN; Fatigue load limit Pu:9.15 kN; Reference speed:7500 r/min; Fw:55 mm; Basic static load rating C0:75 kN; |
| NN3030KTN9/SPW33 Cylindrical Roller Bearing 150x225x56mm | db min.:42 mm; b:2 mm; Mass bearing:0.1 kg; Calculation factor fHC:1; Static axial stiffness, preload class A:78 N/µm; Basic dynamic load rating C:9.23 kN; Attainable speed for oil-air lubrication:44000 r/min; d1:46.5 mm; Calculation factor (back-to-back, face-to-face) X2:0.67; Fatigue load limit Pu:0.245 kN; |
| NU2324 Cylindrical Roller Bearing 120*260*86mm | Calculation factor kr:0.2; das:170 mm; B:40 mm; ra max.:1 mm; b1:7 mm; Da max.:194 mm; Basic dynamic load rating C:260 kN; s max.:2 mm; Limiting speed:1700 r/min; D1 ≈:182 mm; |
| N407 35*100* 25mm | Threads per inch:8; G:189.789 mm; Sleeve:S 3038x6.15/16; d:190 mm; B4:31.75 mm; d3 max.:220.802 mm; B:28.829 mm; Lock washer:W 038; Hydraulic nut:HMVC 38E; d1:176.213 mm; |
| HCN1012-K-PVPA-SP Bearing 60x95x18mm | Designation associated G design radial shaft seal with a low cross-sectional height:G 20x28x4; Basic dynamic load rating C:29.2 kN; Ew:28 mm; Fw:20 mm; Basic static load rating C0:39 kN; Fatigue load limit Pu:4.9 kN; Limiting speed:20000 r/min; Designation associated SD design radial shaft seal with a low cross-sectional height:SD 20x28x4; Reference speed:18000 r/min; Mass needle roller and cage assembly:0.032 kg; |
| Cylindrical Roller NJ210ECM Bearing | Da max.:156 mm; da max.:100 mm; Calculation factor Y0:0.4; Dimension series:7FC; Mass bearing:4.85 kg; d:85 mm; Cb min.:15 mm; B:45 mm; Calculation factor e:0.79; db min.:100.5 mm; |