| SL181852-E Cylindrical Roller Bearing 260x320x28mm | Preload class B GB:35 N; Calculation factor f:1.02; Mass bearing:0.011 kg; Attainable speed for grease lubrication:130000 r/min; D:22 mm; r1,2 min.:0.3 mm; Preload class A GA:15 N; Static axial stiffness, preload class B:16 N/µm; C1:4.25 mm; Number of balls z:8; |
| NNU39/630 Bearing | B5:55.016 mm; Threads per inch:5; Mass adapter sleeve assembly:39 kg; Sleeve:S 3072x13.7/16; d3 max.:419.227 mm; B1:192.253 mm; G:359.918 mm; Locking plate:PL 72; B:45.491 mm; Lock nut:N 072; |
| NUP211, NUP211E, NUP211M, NUP211ETVP2, NUP211ECP Cylindrical Roller Bearing | A1:111.125 mm; P150°:44.5 kN; End plug (suffix Y):EPR 11; Mass pillow block:41.1 kg; R2:28.575 mm; N1:22.225 mm; P60°:128 kN; Housing:SAF 618; L:393.7 mm; Pa:11.6 kN; |
| NU2322 Cylindrical Roller Bearings | Specific static load factor K0:20 N/mm²; Mass bushing:0.058 kg; B:25 mm; Coefficient of friction µ max.:0.1; Permissible sliding velocity v max.:5 m/s; Tolerance housing:H7; Permissible sliding velocity v min.:0.25 m/s; d:12 mm; D:25 mm; Coefficient of friction µ min.:0.05; |
| SL014832 Bearing | G:M 39x3; Basic static load rating C0:140 kN; r1 min.:0.6 mm; C1 max.:24 mm; Material constant KM:330; l2 max.:199 mm; B:28 mm; d:40 mm; α:6 °; l1 min.:86 mm; |
| SL183032 Cylindrical Roller Bearing 160x240x60mm | Basic Dynamic Radial Load Rating C:41000 N; Grease Speed Rating n1:7500 rpm; Basic Static Radial Load Rating Co:24000 N; Grease Speed Rating Open/Shielded n1:7500 rpm; Oil Speed Rating Open/Shielded n2:9000 rpm; Accessories:Snap-Ring; Fillet Radius ra:1.50 mm; Oil Speed Rating n2:9000 rpm; D:90.0000 mm; B:23.00 mm; |
| NJ1048M Bearing | D:170.0000 mm; B:32.00 mm; d:95.000 mm; Basic Static Radial Load Rating Co:118000 N; Basic Dynamic Radial Load Rating C:111000 N; Grease Speed Rating Open/Shielded n1:3100 rpm; Fillet Radius ra:2.00 mm; Oil Speed Rating Open/Shielded n2:3800 rpm; Accessories:Snap-Ring; |
| NU 240 Cylindrical Roller Bearing | Initial grease fill:110.56 g; H:182.166 mm; Cap bolt, SAE grade:5; J1:53.975 mm; A2:127 mm; Labyrinth ring:2 x LOR 51; N1:19.05 mm; Adapter sleeve assembly:SNW 17x2.13/16; da:71.438 mm; P150°:20.9 kN; |