| N220E/P6 Electrical Motor Cylindrical Roller Bearing | A2:247.65 mm; J max.:549.275 mm; Pa:43.6 kN; S:4.763 mm; R1:115.888 mm; J1:107.95 mm; Cap bolt, SAE grade:8; Bearing:22234 CCK/W33; ba:74.612 mm; P60°:345 kN; |
| SL 19 2311 Bearing | Grease quantity for relubrication:13 g; Calculation factor Y1:2.8; P90°:370 kN; L:380 mm; Tightening torque for attachment bolts:665 N·m; Fatigue load limit Pu:39 kN; Calculation factor e:0.24; N:32 mm; B:86 mm; Basic static load rating C0:375 kN; |
| N204 Bearing | Fatigue load limit Pu:1460 kN; Comparative radial load rating CF:1930 kN; Thrust factor K:1.76; Calculation factor Y1:2; d1 ≈:454 mm; Calculation factor Y2:3; Design variant/feature:TQI; r1,2 min.:6.4 mm; Basic static load rating C0:19300 kN; Calculation factor Y0:2; |
| NJ2213, NJ2213E, NJ2213M,NJ2213ECP, NJ2213ETVP2 Cylindrical Roller Bearing | Basic Static Radial Load Rating Co:100000 N; d:130.000 mm; Basic Dynamic Radial Load Rating C:106000 N; B:33.00 mm; Sealed Speed Rating n3:2000 rpm; D:200.0000 mm; Accessories:Two Shields; Grease Speed Rating Open/Shielded n1:3200 rpm; Oil Speed Rating Open/Shielded n2:3800 rpm; Fillet Radius ra:2.00 mm; |
| NJ1024M Bearing | rb max.:1.5 mm; Basic static load rating C0:193 kN; r1,2 min.:1.5 mm; Da max.:115.4 mm; s max.:1.7 mm; Calculation factor kr:0.2; Fatigue load limit Pu:25.5 kN; d:70 mm; r3,4 min.:1.5 mm; Angle ring:HJ 2214 EC; |
| NJ318, NJ318E, NJ318M, NJ318ECP, NJ318-E-TVP2 Cylindrical Roller Bearing | B5:90 mm; d1:590 mm; Mass lock nut:45.8 kg; B:68 mm; Associated spanner:TMFN 500-600; h:20 mm; Lock washer / Locking clip:MS 30/600-530; Associated eyebolt for handling:M 10; d2:558 mm; G:Tr 530x6; |
| NU2064 Single Row Cylindrical Roller Bearing | d:30.163 mm; Basic dynamic load rating C:16.3 kN; Fatigue load limit Pu:0.475 kN; Basic static load rating C0:11.2 kN; d1 ≈:39.7 mm; B4:5 mm; r1,2 min.:0.6 mm; Thread grub screw G2:1/4-28 UNF; Hexagonal key size for grub screw N:3.175 mm; s1:22.2 mm; |
| 65 mm x 140 mm x 33 mm NU308ECP, NU308E, NU308M, NU308 Cylindrical Roller Bearing | Pa:7.83 kN; A2:215.9 mm; Max. speed for Taconite seal:1150 r/min; P120°:49.8 kN; R2:21.431 mm; RG:3/8 NPT; H:174.625 mm; PG:1/8 NPT; Cap bolt:2 x 5/8-11 UNC; Housing:SSAFS 516; Size (mm):65 mm x 140 mm x 33 mm ; |