| NUP416EM1, NUP416 Cylindrical Roller Bearing 80x200x48mm | Basic Dynamic Radial Load Rating C:19500 N; Fillet Radius rb:0.30 mm; Basic Static Radial Load Rating Co:15300 N; D:47.0000 mm; B:24.00 mm; Fillet Radius ra:0.64 mm; Oil Speed Rating n2:14000 rpm; Grease Speed Rating n1:12000 rpm; d:25.000 mm; |
| 549864 200x280x170 | P150°:105 kN; Taconite seal:TER 120; End plug (suffix Y):EPR 27; PG:1/4 NPT; Cap bolt, SAE grade:8; H2:60.325 mm; A1:149.225 mm; Eye bolt:2 x 3/8-16 UNC; L:511.175 mm; H:298.45 mm; |
| SL181872 360*440*38MM Bearing | Specific static load factor K0:45 N/mm²; d:18 mm; Tolerance housing:H7; Coefficient of friction µ min.:0.08; Specific dynamic load factor K:25 N/mm²; D1:32 mm; Permissible sliding velocity v min.:0 m/s; Coefficient of friction µ max.:0.15; Permissible sliding velocity v max.:0.5 m/s; B:16 mm; |
| SL183030 Cylindrical Roller Bearing 150x225x56mm | B:82 mm; D:168 mm; s:3.9 mm; N:13.5 mm; Recommended lower temperature limit for storage (static):-50 °C; d:39 mm; Basic dynamic load rating C:52.7 kN; Basic static load rating C0:45 kN; J:133.35 mm; Sealing system:SKF Mudblock seal; |
| NU220EM Bearing | C1 max.:28 mm; Specific dynamic load factor K:100 N/mm²; Basic dynamic load rating C:127 kN; α:7 °; B:32 mm; d2 max.:104 mm; h:165 mm; Basic static load rating C0:200 kN; l2 max.:219 mm; Material constant KM:330; |
| NU29/530 Rigid Strander Bearing | d:65 mm; r1,2 min.:1.1 mm; B:10.5 mm; Mass shaft washer:0.56 kg; d1:115 mm; |
| High Quality Cylindrical Roller Bearing NJ210E | d1:557 mm; da min.:535 mm; Basic static load rating C0:6700 kN; ra max.:2 mm; r1,2 min.:2.1 mm; D1:463 mm; Limiting speed:630 r/min; Minimum axial load factor A:3.6; H:60 mm; Mass bearing:31.5 kg; |
| N208,N208E, N208M, N208ECP, N208ETVP2 Cylindrical Roller Bearing | Labyrinth ring:2 x LOR 153; End plug (suffix Y):EPR 21; Cap bolt, SAE grade:5; L:558.8 mm; Eye bolt:2 x 3/8-16 UNC; N1:28.575 mm; A2:222.25 mm; PosiTrac Plus contact element:2 x B10724-155; H1:169.875 mm; Stabilizing ring:2 x 38151-38; |