| SL 18 2210 Bearing | Lock nut:HM 3160; Da:540 mm; L:880 mm; db:320 mm; da:300 mm; H:631 mm; Taconite seal:2 x TK 72; N1:42 mm; Ca:196 mm; bc:186.5 mm; |
| 800494 Four Row Cylindrical Roller Bearing | ra max.:2.5 mm; Reference speed:530 r/min; Basic static load rating C0:4000 kN; D1 ≈:634 mm; Fatigue load limit Pu:57 kN; Mass bearing (including seat washer where applicable):62.5 kg; Limiting speed:750 r/min; Minimum load factor A:83; r1,2 min.:3 mm; da min.:699 mm; |
| Cylindrical Roller NUP213ENR Bearing | H1:133.35 mm; Adapter sleeve assembly:SNW 24x4.1/16; Max. speed for Taconite seal:725 r/min; P150°:87.2 kN; Stabilizing ring:SR-24-20; H:257.175 mm; ba:53.181 mm; h:46.831 mm; P60°:249 kN; S:4.763 mm; |
| N207EM Roller Bearing | Ca:45.796 mm; PosiTrac Plus contact element (dc shaft position):B10724-64; P180°:33.8 kN; Max. speed for PosiTrac Plus seal:1450 r/min; H:187.325 mm; Da:150 mm; A1:88.9 mm; N1:19.05 mm; PosiTrac Plus contact element (db shaft position):B10724-89; Lock nut:AN 17; |
| NU307, NU307E, NU307M, NU307ECP,NU307ETVP2 Cylinderical Roller Bearing | Cap bolt recommended tightening torque:149.1 N·m; End plug (suffix Y):EPR 11; H2:41.275 mm; PG:1/8 NPT; H:196.85 mm; Lock nut:AN 18; Mass pillow block:29.9 kg; P60°:141 kN; Cap bolt, SAE grade:8; P120°:53.4 kN; |
| NU307 Cylindrical Roller Bearing 35*80*21mm | Dynamic (Ca):178 kN; T:32 mm; r2s (min):0.6 mm; D:150 mm; Pu:29.590 kN; rs (min):2 mm; a:33 mm; d2:100 mm; Static (Coa):261 kN; C:24 mm; |
| NNU3024/SP Double Row Cylindrical Roller Bearing | B:53 mm; Ba min.:6 mm; ra max.:2 mm; Basic dynamic load rating C:572 kN; B4:21 mm; Limiting speed:4000 r/min; b:8.3 mm; d2 ≈:130 mm; d3:145 mm; Mass bearing + sleeve:8.9 kg; |
| 505470 170x260x225 | b:6.5 mm; r1,2 min.:1.5 mm; Calculation factor Y0:0.58; r0:0.5 mm; D1 ≈:81.2 mm; Calculation factor X:0.6; d1 ≈:58 mm; Basic dynamic load rating C:100 kN; D:100 mm; Mass bearing:1.05 kg; |