| NU 234 Bent Axles Of Diesel Engines Bearing | Basic Dynamic Radial Load Rating C:117000 N; Basic Static Radial Load Rating Co:102000 N; D:150.0000 mm; Fillet Radius ra:2.00 mm; B:35.00 mm; Grease Speed Rating Open/Shielded n1:3800 rpm; Accessories:Two Shields & Snap-R; d:60.000 mm; Oil Speed Rating Open/Shielded n2:4600 rpm; |
| Cylindrical Roller Thrust Bearing 81140 | d2 ≈:117 mm; da min.:108 mm; d1:95 mm; Da max.:168 mm; r1,2 min.:2.1 mm; Basic dynamic load rating C:498 kN; B2 ≈:77 mm; D:180 mm; Calculation factor Y0:2; K:4.5 mm; |
| FC2942155A/YA3 Mill Four Row Cylindrical Roller Bearing | d:45 mm; Oil:2 500 min-1; D1:47 mm; D:100 mm; H:39 mm; static Cor:243.000 kN; rs (min):1.1 mm; Grease:1 900 min-1; d1:100 mm; Pu:11.050 kN; |
| NU1008, NU1008E,NU1008ML, NU1008M1 Cylindrical Roller Bearing | Fw:20 mm; U:25 mm; Reference speed:18000 r/min; Limiting speed:20000 r/min; Basic dynamic load rating C:29.2 kN; Designation associated G design radial shaft seal with a low cross-sectional height:G 20x28x4; Fatigue load limit Pu:4.9 kN; Designation associated SD design radial shaft seal with a low cross-sectional height:SD 20x28x4; Basic static load rating C0:39 kN; Mass needle roller and cage assembly:0.032 kg; |
| NN3036 Double-row Cylindrical Roller Bearing | J:63.5 mm; Recommended diameter for attachment bolts, inch G:0.375 in; Recommended diameter for attachment bolts, mm G:10 mm; Thread grub screw G2:1/4-28 UNF; A5:26 mm; Basic static load rating C0:6.55 kN; N:12.3 mm; Mass bearing unit:0.3 kg; Limiting speed:5000 r/min; T:37.3 mm; |
| NUP 2218 Single Row Bearing | C1 max.:24 mm; d2 max.:94 mm; l3 min.:65 mm; α:6 °; l4 max.:191 mm; B:28 mm; Specific dynamic load factor K:100 N/mm²; d4 ≈:58 mm; Basic static load rating C0:166 kN; G:M 39x3; |
| 81222TN Thrust Cylindrical Roller Bearings | ba:72.231 mm; J max.:488.95 mm; P180°:94.3 kN; N1:28.575 mm; J1:95.25 mm; RG:3/4 NPT; Pa:36.3 kN; Cap bolt recommended tightening torque:203.4 N·m; Taconite seal:TER 118; S:4.763 mm; |
| NU306E Cylindrical Roller Bearing 30*72*19mm | Tightening torque bolt with internal hexagon:46 N·m; Material constant KM:330; G:M 28x1.5; C1 max.:30.5 mm; Specific dynamic load factor K:100 N/mm²; Basic static load rating C0:118 kN; Mass rod end:1.24 kg; l4 max.:113 mm; N max.:66 mm; r1 min.:0.6 mm; |