| NU307EM Bearing 35X80X21mm | Mass needle roller and cage assembly:0.014 kg; Ew:35 mm; U:13 mm; Fw:30 mm; Reference speed:13000 r/min; Basic dynamic load rating C:15.1 kN; Limiting speed:15000 r/min; Basic static load rating C0:25.5 kN; Fatigue load limit Pu:3 kN; |
| NJ2332M Bearing | Calculation factor Y1:1.6; d:105 mm; rc max.:1 mm; Reference speed:2200 r/min; b:10 mm; ra max.:2.5 mm; Da max.:178.5 mm; Calculation factor Y0:1.6; Ca min.:5 mm; Basic dynamic load rating C:571 kN; |
| FC4866220A1 Bearing | B:38.00 mm; Fillet Radius ra:1.00 mm; Grease Speed Rating n1:5300 rpm; D:85.0000 mm; Fillet Radius rb:0.60 mm; Oil Speed Rating n2:7000 rpm; Basic Static Radial Load Rating Co:55000 N; d:45.000 mm; Basic Dynamic Radial Load Rating C:62400 N; |
| 10 mm x 35 mm x 11 mm NU1034M BEARING 170x260x42mm | Oil Speed Rating n2:3600 rpm; Sealed Speed Rating n3:2600 rpm; Fillet Radius ra:2.00 mm; Accessories:No Shield, no Seal,; Basic Static Radial Load Rating Co:140000 N; Basic Dynamic Radial Load Rating C:168000 N; Grease Speed Rating n1:2600 rpm; D:160.0000 mm; B:68.30 mm; d:75.000 mm; Size (mm):10 mm x 35 mm x 11 mm ; |
| N218 Bearing 90*160*30mm | L:279.4 mm; P180°:14.2 kN; RG:1/4 NPT; R2:25.4 mm; Pa:6.94 kN; Stabilizing ring:SR-13-11; P60°:35.6 kN; da:49.212 mm; N1:15.875 mm; Contact seal:2 x B9784-19; |
| N324 Bearing 120*260*55mm | d:55 mm; Basic dynamic load rating C:180 kN; Limiting speed:2200 r/min; s1 max.:7.9 mm; Operating clearance factor k2:0.096; D1 ≈:71.5 mm; da max.:67 mm; D:80 mm; B:45 mm; s2 max.:4.9 mm; |
| SL182996 Cylindrical Roller Bearing 480x650x100mm | RG:1 NPT; P90°:414 kN; Labyrinth ring:2 x LOR 584; Bearing:22244 CCK/W33; da:190.5 mm; H2:95.25 mm; Mass pillow block:365 kg; P180°:285 kN; ba:90.487 mm; Da:399.999 mm; |
| NU2205E Bearing 25X52X18mm | Housing:FSAFS 517; S:4.763 mm; Cap bolt recommended tightening torque:298.3 N·m; J min.:250.825 mm; J max.:279.4 mm; ba:35.719 mm; RG:3/8 NPT; Initial grease fill:110.56 g; L:330.2 mm; Bearing:22217 EK; |