| No. | Brand | M | l | L | G | J | b | F | t |
| 22309CYW33 | SKF | - | - | - | - | - | - | - | - |
| 82.55x133.35x33.338 | Timken | - | - | - | - | - | - | - | - |
| 32014X | fag | - | - | - | - | - | - | - | - |
| 20X | - | - | - | - | - | - | - | - | - |
| N21% | - | - | - | - | - | - | - | - | - |
| 3077715 | INA | - | - | - | - | - | - | - | - |
| 23pcs | - | - | - | - | - | - | 32 mm | - | - |
| 9 | - | - | - | - | - | - | - | - | - |
| 20V, | - | - | - | - | - | - | - | - | - |
| 8mm | - | - | - | - | 418.998 mm | - | - | - | - |
| P331 | - | - | - | - | - | - | - | - | - |
| 10Pcs | - | - | - | - | - | - | - | - | - |
| (XA200352) | - | - | - | - | - | - | - | - | - |
| s.200762 | - | - | - | - | - | - | - | - | - |
| 750 | fag | - | - | - | M 80x4 | - | - | - | - |
| SDH400 | Parker | - | - | 330.2 mm | - | - | - | - | - |
| 94% | - | - | - | - | - | - | - | - | - |
| 22320 | - | - | - | - | - | - | - | - | - |
| 60072ZJEM | SKF | - | - | - | - | - | - | - | - |
| 606RS | - | - | - | - | - | - | - | - | - |
| 2 | IKO | - | - | 225.425 mm | - | - | - | - | - |
| 4x16x5 | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | Tr 420x5 | - | - | - | - |
| 820 | - | - | - | - | - | - | - | - | - |
| 19 | SKF | - | - | - | - | - | - | - | - |
| 23240 | - | - | - | - | M 170x3 | - | - | - | - |
| C240 | - | - | - | - | M 200x3 | - | - | - | - |
| 99.3% | - | - | - | - | - | - | - | 723 mm | - |
| 59mm | Rexroth | - | - | - | - | - | - | - | - |
| 28% | - | - | - | - | - | - | - | - | - |
| NJ 332 Turbine Engine Mainshaft Bearing | End cover:ECW 207; B:42.9 mm; Recommended tightening torque for grub screw:6.5 N·m; J:92.1 mm; Recommended diameter for attachment bolts, inch G:0.5 in; Recommended diameter for attachment bolts, mm G:12 mm; RG:1/4-28 UNF; L:117.5 mm; R1:24 mm; Mass bearing unit:1.8 kg; |
| NJ310, NJ310E, NJ310M, NJ310ECP, NJ310ETVP2 Cylindrical Roller Bearing | Oil Speed Rating n2:2600 rpm; Fillet Radius ra:2.00 mm; B:72.00 mm; d:140.000 mm; Basic Static Radial Load Rating Co:310000 N; Basic Dynamic Radial Load Rating C:225000 N; D:220.0000 mm; Fillet Radius rb:1.00 mm; Grease Speed Rating n1:1500 rpm; |
| NJ1034M Bearing | Fatigue load limit Pu:13.2 kN; db min.:111 mm; Basic dynamic load rating C:84.2 kN; Reference speed:6000 r/min; d:95 mm; da max.:106 mm; F:108 mm; Limiting speed:10000 r/min; Calculation factor kr:0.15; r1,2 min.:1.5 mm; |
| Cylindrical Roller Bearing NJ413+HJ413 | r2 max.:1 mm; Lw:17.8 mm; r1,2 min.:0.3 mm; r1 max.:0.8 mm; Mass needle roller:1.34 g; Dw:3.5 mm; |
| Cylindrical Roller Bearing 21306CCK/W33 | End plug (suffix Y):EPR 19; Cap bolt recommended tightening torque:1220 N·m; Housing:SAFS 234; H2:69.85 mm; Eye bolt:2 x 3/8-16 UNC; Mass pillow block:157 kg; Taconite seal (dc shaft position):TER 148; P90°:207 kN; H1:179.4 mm; dc:163.512 mm; |
| N1008-K-M1-SP Bearing | Oil Speed Rating n2:4300 rpm; Basic Static Radial Load Rating Co:125000 N; Fillet Radius ra:1.50 mm; B:39.70 mm; Grease Speed Rating n1:3200 rpm; D:125.0000 mm; Accessories:Two Seals; Basic Dynamic Radial Load Rating C:101000 N; d:70.000 mm; Sealed Speed Rating n3:3200 rpm; |
| 579713 Four Row Cylindrical Roller Bearing For Back Up | Da min.:422 mm; Ba min.:12 mm; d3:380 mm; Da max.:480 mm; Mass bearing + sleeve:150 kg; D:500 mm; Basic static load rating C0:5200 kN; d1:280 mm; Reference speed:950 r/min; Basic dynamic load rating C:3250 kN; |
| SL045004PP Cylindrical Roller Bearings SL Series | Hydraulic nut:HMVC 20E; Lock nut:AN 20; B4:21.438 mm; d1:84.138 mm; B:19.304 mm; B1:72.619 mm; G:99.517 mm; d:100 mm; d3 max.:131.902 mm; Lock washer:W 20; |
cylindrical roller bearing catalog tc ylindrical r oller ... - Timken
www.timken.com for the most recent version of the cylindrical roller Bearing catalog. TABLE 1. RADIAL CYLINDRICAL ROLLER BEARING. TYPES AND SIzES
Cylindrical & Single Row Roller Bearings | AST Bearings
Cylindrical Roller Bearings are bearing in which cylinders are used as the rolling elements as opposed to balls in ball bearings
Cylindrical roller bearings
SKF cylindrical roller bearings are available in many designs, series and sizes. The major design differences between the bearings presented in this section are
Cylindrical Roller Bearings | Roller Bearings | Products | NSK
In bearings of this type, the cylindrical rollers are in linear contact with the raceways. They have a high radial load capacity and are suitable for high speeds
Cylindrical Roller Bearings | NTN Bearing
Cylindrical roller bearings have rollers that provide a modified line contact with the cylindrical inner and outer ring raceways, while the rollers are guided by
Cylindrical Bearings | The Timken Company
These are the true tests of any bearing. Our comprehensive line of single-, double- and multi-row Timken® cylindrical roller bearings helps extend equipment life
Cylindrical Roller Bearings - Radial Roller Bearings
Cylindrical Roller Bearings are designed to carry heavy radial loads. These bearings are made with a single row, two rows, or multi-rows of rolling elements to
Cylindrical Roller Bearing NU2308 Video