| Cylindrical Roller Bearing NU314 | A1:180.975 mm; H1:190.5 mm; Ca:95.809 mm; N1:28.575 mm; J max.:600.075 mm; R1:114.3 mm; PG:1/4 NPT; Stabilizing ring:SR-36-30; Bearing limiting speed:2600 r/min; Da:319.999 mm; |
| NU414, NU414E, NU414M, NU414M1 Cylindrical Roller Bearing | Labyrinth ring:2 x LOR 120; Cap bolt recommended tightening torque:813.5 N·m; Max. speed for PosiTrac Plus seal:1150 r/min; Cap bolt:7/8-9 UNC; Eye bolt:2 x 3/8-16 UNC; H2:60.325 mm; R1:87.313 mm; J1:85.725 mm; Ca:77.8 mm; Mass pillow block:92.5 kg; |
| NU204 Bearing 20x47x14mm | Basic static load rating C0:38000 kN; B1:183 mm; ra max.:8 mm; r1,2 min.:9.5 mm; H:190 mm; B:68 mm; d:630 mm; Da max.:860 mm; D1 ≈:761 mm; D:950 mm; |
| Cylindrical Roller Bearing NU2317 | N1:22.225 mm; Initial grease fill:218.29 g; H2:31.75 mm; ba:31.75 mm; P120°:31.6 kN; RG:3/8 NPT; A1:88.9 mm; End plug (suffix Y):EPR 9; R2:22.225 mm; Cap bolt:2 x 5/8-11 UNC; |
| FC2842155K/C9YA3 172828U Mill Four Row Cylindrical Roller Bearing | H:317.5 mm; Cap bolt:7/8-9 UNC; Bearing:22230 CCK/W33; RG:3/4 NPT; Initial grease fill:623.7 g; Pa:32.7 kN; End plug (suffix Y):EPR 16; Cap bolt, SAE grade:8; H2:63.5 mm; Mass pillow block:117 kg; |
| NJ314, NJ314E, NJ314M, NJ314ECP, NJ314ETVP2 Cylindrical Roller Bearing | B:80 mm; F:350 mm; r, r1,2 min.:2.1 mm; Mass inner ring:9.8 kg; d:320 mm; |
| High Quality NUP 412 M Bearing | a:46 mm; rs (min):3 mm; D:200 mm; Pu:66.730 kN; r2s (min):1 mm; Static (Coa):630 kN; d2:110 mm; r1s (min):2.5 mm; B:53 mm; T:56 mm; |
| NU220EM Bearing | C1 max.:28 mm; Specific dynamic load factor K:100 N/mm²; Basic dynamic load rating C:127 kN; α:7 °; B:32 mm; d2 max.:104 mm; h:165 mm; Basic static load rating C0:200 kN; l2 max.:219 mm; Material constant KM:330; |