| Cylindrical Roller NU309ECM.C3 Bearing | J min.:320.675 mm; Initial grease fill:232.47 g; A1:120.65 mm; J1:69.85 mm; H:239.316 mm; P90°:107 kN; Bearing:22222 EK; RG:3/8 NPT; Cap bolt:5/8-11 UNC; Ca:62.89 mm; |
| NU220E Cylindrical Roller Bearing 100*180*34mm | Hydraulic nut:HMVC 30E; d:150 mm; G:159.614 mm; d1:136.525 mm; Mass adapter sleeve assembly:8.15 kg; Sleeve:S 130x5.3/8; B4:28.575 mm; Lock nut:AN 30; d3 max.:195.402 mm; Threads per inch:12; |
| NU1026M Bearing | Width Plain B:5.6 mm; Basic Dynamic Radial Load Rating C:2810 N; Oil Speed Rating Open/Shielded n2:48000 rpm; d:6.400 mm; Shielded or Sealed B1:7.1 mm; Basic Static Radial Load Rating Co:1160 N; Accessories:One Seal; D:19.1000 mm; Sealed Speed Rating n3:27000 rpm; Grease Speed Rating Open/Shielded n1:39000 rpm; |
| Cylindrical Roller Bearing NU206 | T:48.5 mm; r2s (min):1 mm; r1s (min):2.5 mm; d2:60 mm; D:130 mm; Static (Coa):293 kN; B:46 mm; rs (min):3 mm; C:37 mm; Dynamic (Ca):200 kN; |
| RN308M Cylindrical Roller Bearings 40x77.5x23mm | R2:42.862 mm; PG:1/4 NPT; Housing:SAF 048 KA; Taconite seal:TER 552; J min.:571.5 mm; Max. speed for Taconite seal:340 r/min; P120°:136 kN; Pa:66.7 kN; A1:203.2 mm; Cap bolt, SAE grade:5; |
| NU1017 Cylindrical Roller Bearing 85*130*22mm | Oil Speed Rating Open/Shielded n2:6500 rpm; Fillet Radius ra:2.00 mm; Accessories:Without Accessories; D:110.0000 mm; Grease Speed Rating Open/Shielded n1:5300 rpm; B:27.00 mm; d:40.000 mm; Basic Static Radial Load Rating Co:52000 N; Basic Dynamic Radial Load Rating C:68200 N; |
| NU305 Cylindrical Bearing 25x62x17mm | Mass needle roller and cage assembly:0.018 kg; Reference speed:13000 r/min; Limiting speed:14000 r/min; Basic dynamic load rating C:14.7 kN; Fatigue load limit Pu:3 kN; Basic static load rating C0:25.5 kN; Ew:37 mm; Fw:32 mm; U:13 mm; |
| N1996-K-M1-SP Bearing 480x650x78 Mm | Coefficient of friction µ max.:0.15; Specific dynamic load factor K:25 N/mm²; h:252.5 mm; Specific static load factor K0:45 N/mm²; Permissible sliding velocity v max.:0.5 m/s; Coefficient of friction µ min.:0.08; Tolerance shaft:e7; D:270 mm; Mass bushing:7.21 kg; Permissible sliding velocity v min.:0 m/s; |