| NU 2272 Cylindrical Roller Bearing | A1:133.35 mm; P150°:68.1 kN; R1:79.375 mm; J min.:371.475 mm; Adapter sleeve assembly:SNW 22x3.15/16; Pa:16.7 kN; J max.:406.4 mm; Housing:SAF 622; RG:1/2 NPT; Bearing:1322 KM; |
| NJ2308E Cylindrical Roller Bearing 42608E | Stabilizing ring:2 x SR-15-0; P120°:20 kN; Appropriate attachment bolt size G:0.5 in; P180°:22.2 kN; J max.:244.475 mm; H1:82.55 mm; Bearing:1215 K; Cap bolt recommended tightening torque:81.3 N·m; Cap bolt, SAE grade:5; L:285.75 mm; |
| NNU38/750 Bearing | B:13.5 mm; Mass shaft washer:1.33 kg; r1,2 min.:1.5 mm; d1:155 mm; d:90 mm; |
| NNCF4840V Cylindrical Bearing 200x250x50 | Accessories:Without Accessories; B:28.00 mm; Fillet Radius ra:2.00 mm; Basic Dynamic Radial Load Rating C:81800 N; Oil Speed Rating Open/Shielded n2:4500 rpm; Sealed Speed Rating n3:2400 rpm; D:170.0000 mm; d:110.000 mm; Basic Static Radial Load Rating Co:73500 N; Grease Speed Rating Open/Shielded n1:3800 rpm; |
| Cylindrical Roller Bearing RNU305E | Basic Dynamic Radial Load Rating:2380 lbf; Dimension G:0.4375 in; Dimension B:3.6250 in; Pin Dia A1:0.5313 in; Dimension H:1.0625 in; Dimension C:3.0000 in; Dimension S1:0.7188 in; Dimension L:3.6875 in; Insert Bearing IB:Stainless Steel; Dimension D2:2.3750 in; |
| NU1052M Bearing | da:303.212 mm; Ca:181 mm; A2:345 mm; Adapter sleeve:H 3064/11.15/16; H:591 mm; P90°:2900 kN; Cap bolt, size:M 30x220; Q150°:1650 kN; N4 max.:25 mm; Eye bolt, size:2 x M 30; |
| 40 mm x 68 mm x 15 mm NU 420M Cylindrical Roller Bearing | Oil Speed Rating n2:11000 rpm; d:25.000 mm; Sealed Speed Rating n3:8000 rpm; Accessories:Two Seals; Basic Static Radial Load Rating Co:21200 N; Grease Speed Rating n1:8000 rpm; Basic Dynamic Radial Load Rating C:22900 N; Fillet Radius ra:1.00 mm; B:20.60 mm; D:52.0000 mm; Size (mm):40 mm x 68 mm x 15 mm ; |
| NU305 Bearing 25X62X17mm | Mass:1.05 kg; d1:105 mm; B:32 mm; Associated spanner (Hook spanner in accordance with DIN 1810):HN 16; G:M 80x2; h:3.5 mm; d5:109 mm; Grub (set) / Locking screw size:M 6; Recommended tightening torque:14.2 N·m; d3:110 mm; |