| NU203ECJ High Quality Cylindrical Roller Bearing | Stabilizing ring:SR-18-15; da:90 mm; N1:19.05 mm; Da:160 mm; R1:60.325 mm; A2:210.344 mm; Mass pillow block:23.1 kg; Housing:SAW 218; Bearing:23218 CC/W33; H2:44.45 mm; |
| NN3956 Bearing | F:661 mm; Limiting speed:900 r/min; Basic static load rating C0:8000 kN; ra max.:5 mm; Axial load factor Y:0; Da max.:847 mm; db min.:667 mm; Mass bearing:325 kg; B:155 mm; s max.:6.1 mm; |
| Cylindrical Roller NJ2220ECM Bearing | D:225.0000 mm; Basic Static Radial Load Rating Co:212000 N; Fillet Radius ra:3.00 mm; Accessories:One Shield & Snap-Ri; B:54.00 mm; Grease Speed Rating Open/Shielded n1:2500 rpm; Basic Dynamic Radial Load Rating C:198000 N; d:90.000 mm; Oil Speed Rating Open/Shielded n2:3000 rpm; |
| NJ2320 Bearing | B:50.00 mm; Fillet Radius rb:1.00 mm; D:100.0000 mm; Grease Speed Rating n1:5300 rpm; Oil Speed Rating n2:6800 rpm; Basic Static Radial Load Rating Co:81500 N; Fillet Radius ra:1.50 mm; Basic Dynamic Radial Load Rating C:104000 N; d:35.000 mm; |
| NUP205, NUP205E, NUP205M, NUP205EM,NUP205ECP, NUP205ETVP2 Cylindrical Roller Bearing | Coefficient of friction µ max.:0.1; Coefficient of friction µ min.:0.05; Tolerance housing:H7; B:40 mm; Tolerance shaft:h8; D:41 mm; Specific static load factor K0:20 N/mm²; d:35 mm; Mass bushing:0.088 kg; Permissible sliding velocity v min.:0.25 m/s; |
| NU1038ML BEARING 190x290x46mm | RG:1/4-28 UNF; Rα:45 °; L:96 mm; Bearing:YAR 207-106-2F; Thread grub screw G2:5/16-24 UNF; End cover:ECY 207; A3:3.2 mm; H:156 mm; SWN:7 mm; Recommended tightening torque for grub screw:6.5 N·m; |
| NU412 Cylindrical Roller Bearing 60*150*35mm | rs (min):1 mm; d2:50 mm; Pu:10.660 kN; C:15.5 mm; a:18 mm; r2s (min):0.3 mm; D:80 mm; T:20 mm; Static (Coa):87.4 kN; B:20 mm; |
| 538977 Four Row Cylindrical Roller Beairng | Pin Dia A1:0.2500 in; Dimension C:2.6250 in; Dimension N:0.7813 in; Basic Static Radial Load Rating Co:1750 lbf; Dimension H:0.8750 in; Dimension B:3.1250 in; Insert Bearing IB:Stainless Steel; Weight W:0.70 lb; Dimension S1:0.7813 in; Shaft Diameter D:1 in; |