| Cylindrical Roller Bearing N 211 ECP, N 211 ECM, N 211 ECJ | Fillet Radius rb:1.00 mm; Basic Dynamic Radial Load Rating C:108000 N; D:140.0000 mm; Basic Static Radial Load Rating Co:78000 N; Oil Speed Rating n2:5800 rpm; B:33.00 mm; d:55.000 mm; Grease Speed Rating n1:4500 rpm; Fillet Radius ra:2.00 mm; |
| Wire Rope Pulleys Of Cranes Bearing NCF1876V | Fillet Radius ra:1.00 mm; Grease Speed Rating Max. n1:24000 rpm; Preload:0 lb; Keyway f:1.6 mm; X-L-O Part Number:55-107; Keyway e:21.4 mm; B:25.40 mm; d:20.640 mm; D:50.8000 mm; Oil Speed Rating Max. n2:27000 rpm; |
| NU313ECJ Cylindrical Bearing 65x140x33mm | D:160.0000 mm; Grease Speed Rating n1:2600 rpm; Oil Speed Rating n2:3600 rpm; Basic Static Radial Load Rating Co:190000 N; Fillet Radius ra:2.00 mm; Basic Dynamic Radial Load Rating C:178000 N; d:90.000 mm; Fillet Radius rb:1.00 mm; B:60.00 mm; |
| FC2842155K/C9YA3 Mill Four Row Cylindrical Roller Bearing 140x210x155mm | Mass pillow block:54 kg; Eye bolt:2 x 3/8-16 UNC; da:93.662 mm; H2:52.388 mm; H:244.475 mm; ba:50.006 mm; Cap bolt, SAE grade:8; Ca:62.89 mm; Initial grease fill:232.47 g; RG:3/8 NPT; |
| RN308M Cylindrical Roller Bearings 40x77.5x23mm | R2:42.862 mm; PG:1/4 NPT; Housing:SAF 048 KA; Taconite seal:TER 552; J min.:571.5 mm; Max. speed for Taconite seal:340 r/min; P120°:136 kN; Pa:66.7 kN; A1:203.2 mm; Cap bolt, SAE grade:5; |
| SL014864 Cylindrical Roller Bearings 320x400x80mm | Limiting speed:4800 r/min; Housing material:Composite; A1:30 mm; d:40 mm; Basic dynamic load rating C:30.7 kN; Basic static load rating C0:19 kN; Hexagonal key size for grub screw N:3 mm; H:99.5 mm; Recommended diameter for attachment bolts, mm G:12 mm; N:21.5 mm; |
| SL183006 Cylindrical Roller Bearing 30x55x19mm | Basic Dynamic Radial Load Rating C:55300 N; Fillet Radius ra:1.00 mm; d:120.000 mm; D:165.0000 mm; B:22.00 mm; Basic Static Radial Load Rating Co:57000 N; Oil Speed Rating Open/Shielded n2:4300 rpm; Sealed Speed Rating n3:2300 rpm; Grease Speed Rating Open/Shielded n1:3600 rpm; Accessories:Two Shields; |
| SL 18 3080 Bearing | Basic dynamic load rating C:212 kN; Mass bearing unit:9.53 kg; B:65.484 mm; H1:82.55 mm; A:68.263 mm; H2:57.15 mm; da:74.612 mm; J min.:198.438 mm; H:165.894 mm; L:265.113 mm; |