| NU 2992 Rigid Stranders Bearing | B:55.60 mm; D:170.0000 mm; Oil Speed Rating n2:3200 rpm; Accessories:Two Seals & Snap-Rin; Fillet Radius ra:2.00 mm; d:95.000 mm; Grease Speed Rating n1:2200 rpm; Basic Dynamic Radial Load Rating C:159000 N; Basic Static Radial Load Rating Co:146000 N; Sealed Speed Rating n3:2200 rpm; |
| NNU3040/P2 Double Row Cylindrical Roller Bearing | B5:47.092 mm; d3 max.:330.327 mm; B1:197.002 mm; Sleeve:S 3156x10.1/2; Hydraulic nut:HMVC 56E; Locking plate:PL 56; Lock nut:N 056; B:38.354 mm; Threads per inch:6; d1:266.7 mm; |
| N1024M Bearing 120x180x28mm | d:25 mm; H:41.3 mm; r1,2 min.:1 mm; D1 ≈:32 mm; D3:62 mm; rb max.:0.3 mm; Basic static load rating C0:65.5 kN; R:50 mm; D:60 mm; Basic dynamic load rating C:35.8 kN; |
| NJ 232 EMA Cylindrical Roller Bearing | Basic Dynamic Radial Load Rating C:14000 N; Basic Static Radial Load Rating Co:7800 N; Oil Speed Rating n2:15000 rpm; B:15.00 mm; D:52.0000 mm; Grease Speed Rating n1:12000 rpm; Grease Speed Rating Open/Shielded n1:12000 rpm; Sealed Speed Rating n3:8500 rpm; d:25.000 mm; Fillet Radius ra:1.00 mm; |
| NN3028KTN9/SPW33 Cylindrical Roller Bearing 140x210x53mm | Basic Dynamic Radial Load Rating C:436000 N; Basic Static Radial Load Rating Co:610000 N; Grease Speed Rating n1:1600 rpm; Fillet Radius ra:3.00 mm; B:61.00 mm; Oil Speed Rating n2:1900 rpm; D:380.0000 mm; Fillet Radius rb:1.00 mm; d:210.000 mm; |
| Cylindrical Roller Bearing NU2230E.M1 | Grease Speed Rating Open/Shielded n1:22000 rpm; Sealed Speed Rating n3:15000 rpm; Basic Dynamic Radial Load Rating C:6890 N; Basic Static Radial Load Rating Co:3100 N; B:10.00 mm; Oil Speed Rating n2:28000 rpm; Oil Speed Rating Open/Shielded n2:28000 rpm; d:12.000 mm; Grease Speed Rating n1:22000 rpm; Accessories:Snap-Ring; |
| NNF5020ADA-2LSV Cylindrical Roller Bearings | B4:27.5 mm; Basic dynamic load rating C:614 kN; d2 ≈:180 mm; Fatigue load limit Pu:83 kN; Calculation factor Y1:3; Calculation factor e:0.22; d3:190 mm; Da max.:229 mm; Calculation factor Y0:2.8; ra max.:2 mm; |
| NU206 Bearing 30x62x16mm | Mass pillow block:12.2 kg; Housing:FSAF 215; Max. speed for Taconite seal:900 r/min; P180°:22.2 kN; Cap bolt recommended tightening torque:81.3 N·m; J min.:219.075 mm; P150°:18.2 kN; P60°:54.7 kN; R2:21.431 mm; Initial grease fill:68.04 g; |