| No. | Brand | M | l | L | G | J | b | F | t |
| 314NPP | FAFNIR | - | - | - | - | 92 mm | - | - | - |
| 1985-2001 | koyo | - | - | - | - | - | - | - | - |
| 6310 | NSK | - | - | - | - | - | - | - | - |
| (3-19mm) | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 031 | - | - | - | - | - | - | - | - | - |
| A17FO080/10NLWK0E81-0 | Rexroth | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| RF600 | - | - | - | - | - | - | - | - | - |
| PC75UU | INA | - | - | - | - | - | - | - | - |
| 6203-625VVC3E | NSK | - | - | - | - | - | - | - | - |
| RG500 | - | - | - | - | - | - | - | - | - |
| 6D16 | - | - | - | - | - | - | - | - | - |
| 30100.2Z | INA | - | - | - | - | - | - | - | - |
| 25877R | koyo | - | - | - | - | - | - | - | - |
| 28x58x16 | - | - | - | - | - | - | - | 1053 mm | - |
| Omv-500-4MD | - | - | - | - | M 52x3 | - | - | - | - |
| C3 | - | - | - | - | - | - | - | - | - |
| 150*250 | - | - | - | - | - | - | - | - | - |
| N1072-K-M1-SP Bearing 360x480x56mm | Housing:SAF 318; Appropriate attachment bolt size G:0.75 in; Cap bolt recommended tightening torque:515.2 N·m; H2:50.8 mm; J1:57.15 mm; A2:237.331 mm; Lock nut:AN 18; ba:52.388 mm; P150°:44.5 kN; dc:85.725 mm; |
| NJ 18/1180 Cylindrical Roller Bearing | Basic Static Radial Load Rating Co:80000 N; Oil Speed Rating n2:5600 rpm; B:33.00 mm; Fillet Radius ra:2.00 mm; Grease Speed Rating n1:4300 rpm; Fillet Radius rb:1.00 mm; d:65.000 mm; Basic Dynamic Radial Load Rating C:101000 N; D:140.0000 mm; |
| 81138 Thrust Cylindrical Roller Bearing | Basic Static Radial Load Rating Co:27000 N; d:65.000 mm; Sealed Speed Rating n3:4000 rpm; Grease Speed Rating Open/Shielded n1:6300 rpm; Fillet Radius ra:1.00 mm; Oil Speed Rating Open/Shielded n2:77500 rpm; D:100.0000 mm; B:18.00 mm; Basic Dynamic Radial Load Rating C:33800 N; Accessories:Shield & Seal; |
| 1.969 Inch | 50 Millimeter x 3.543 Inch | 90 Millimeter x 0.787 Inch | 20 Millimeter NJ2203, NJ2203M, NJ2203EM, NJ2203ECP Cylindrical Roller Bearing | Bearing:22232 CCK/W33; S:4.763 mm; R1:104.775 mm; A2:288.925 mm; J1:95.25 mm; Eye bolt:2 x 3/8-16 UNC; Cap bolt recommended tightening torque:813.5 N·m; Initial grease fill:793.8 g; PG:1/4 NPT; RG:3/4 NPT; Size (mm):1.969 Inch | 50 Millimeter x 3.543 Inch | 90 Millimeter x 0.787 Inch | 20 Millimeter ; |
| SL 18 1840 Bearing | Material constant KM:330; Specific dynamic load factor K:100 N/mm²; b:9.3 mm; b1:8 mm; Da min.:114.2 mm; rb max.:1 mm; M:6.5 mm; da max.:90.6 mm; B:76.759 mm; Design (sliding contact surface combination):Steel/steel; |
| SL024934 Cylindrical Roller Bearing | Grease Speed Rating n1:6300 rpm; d:30.000 mm; Oil Speed Rating n2:8500 rpm; Fillet Radius ra:1.00 mm; Basic Static Radial Load Rating Co:43000 N; Accessories:Two Seals & Snap-Rin; Sealed Speed Rating n3:6300 rpm; Basic Dynamic Radial Load Rating C:46800 N; B:33.30 mm; D:72.0000 mm; |
| NU1024M Bearing 120x180x28mm | Fillet Radius ra:2.00 mm; Fillet Radius rb:1.00 mm; Grease Speed Rating n1:3800 rpm; d:80.000 mm; Oil Speed Rating n2:5400 rpm; Basic Static Radial Load Rating Co:260000 N; Basic Dynamic Radial Load Rating C:255000 N; B:78.00 mm; D:170.0000 mm; |
| SL 18 1860 Bearing | J min.:320.675 mm; Bearing:22222 EK; Cap bolt:2 x 3/4-10 UNC; R2:31.75 mm; da:93.662 mm; Housing:SAF 522; P120°:55.6 kN; End plug (suffix Y):EPR 13; P60°:149 kN; Adapter sleeve assembly:SNW 22x3.11/16; |
Cylindrical roller bearings
SKF cylindrical roller bearings are available in many designs, series and sizes. The major design differences between the bearings presented in this section are
Cylindrical Bearings | The Timken Company
These are the true tests of any bearing. Our comprehensive line of single-, double- and multi-row Timken® cylindrical roller bearings helps extend equipment life
Cylindrical Roller Bearings | Roller Bearings | Products | NSK
In bearings of this type, the cylindrical rollers are in linear contact with the raceways. They have a high radial load capacity and are suitable for high speeds
Cylindrical Roller Bearings - Radial Roller Bearings
Cylindrical Roller Bearings are designed to carry heavy radial loads. These bearings are made with a single row, two rows, or multi-rows of rolling elements to
Cylindrical & Single Row Roller Bearings | AST Bearings
Cylindrical Roller Bearings are bearing in which cylinders are used as the rolling elements as opposed to balls in ball bearings
Cylindrical Roller Bearings | NTN Bearing
Cylindrical roller bearings have rollers that provide a modified line contact with the cylindrical inner and outer ring raceways, while the rollers are guided by
cylindrical roller bearing catalog tc ylindrical r oller ... - Timken
www.timken.com for the most recent version of the cylindrical roller Bearing catalog. TABLE 1. RADIAL CYLINDRICAL ROLLER BEARING. TYPES AND SIzES
NN3020 High Precision Cylindrical Roller Bearing Video