| INA NUKRE 52 Bearing | Mass pillow block:160 kg; Lock washer:W 34; RG:3/4 NPT; Lock nut:AN 34; A1:171.45 mm; End plug (suffix Y):EPR 19; Initial grease fill:878.85 g; A2:309.575 mm; H2:69.85 mm; Pa:73.4 kN; |
| NJ2308 Bearing | d:45 mm; B:25.5 mm; F:50 mm; r, r1,2 min.:0.3 mm; Mass inner ring:0.075 kg; |
| Cylindrical Roller Bearing NU2205E | Bearing designation:6311 ; B:29 mm; Da:110 max; ra:2 max; Static (Cor):44.700 kN; rs:2 mm; Grease:5 600 min-1; d:55 mm; Pu:2.032 kN; Weight:1.38 kg; |
| NN3044KTN9/SPW33 Cylindrical Roller Bearing 220x340x90mm | K:7.5 mm; Calculation factor Y0:1.8; d1:140 mm; Mass bearing + sleeve:38.8 kg; B1:147 mm; D:290 mm; Basic static load rating C0:1660 kN; Limiting speed:2200 r/min; db min.:174 mm; d2 ≈:188 mm; |
| 514444 Four Row Cylindrical Roller Bearing | B:18.00 mm; Accessories:Without Accessories; D:80.0000 mm; Fillet Radius ra:1.00 mm; Oil Speed Rating Open/Shielded n2:8500 rpm; d:40.000 mm; Basic Static Radial Load Rating Co:26500 N; Grease Speed Rating Open/Shielded n1:7000 rpm; Basic Dynamic Radial Load Rating C:33600 N; |
| NUP1018M Bearing | Height H:3.9375 in; Thread Diameter G:1/2-13; Dimension S1:1.1875 in; Weight W:6.00 lb; Dimension H1:1.9375 in; Width A:1.8750 in; Dimension F:0.7500 in; Dimension L:4.5000 in; Distance J:3.5000 in; Insert Bearing IB:ZMaRC; |
| NJ1024M Bearing | rb max.:1.5 mm; Basic static load rating C0:193 kN; r1,2 min.:1.5 mm; Da max.:115.4 mm; s max.:1.7 mm; Calculation factor kr:0.2; Fatigue load limit Pu:25.5 kN; d:70 mm; r3,4 min.:1.5 mm; Angle ring:HJ 2214 EC; |
| NJ1030M Bearing | Specific dynamic load factor K:100 N/mm²; dk:92 mm; d:70 mm; Material constant KM:330; Mass rod end:7.9 kg; Basic dynamic load rating C:315 kN; l1 min.:125 mm; B:49 mm; h:235 mm; G:M 56x4; |