| HCN1015-K-PVPA-SP-H193 Bearing 75x115x20mm | d:160 mm; Hydraulic nut:HMV 32 E; B4:27.5 mm; d3:190 mm; Lock nut:KML 32; Mass adapter sleeve assembly:7.55 kg; d1:138.113 mm; B1:119 mm; G:M 160x3; Locking device:MBL 32; |
| NJ326M Bearing | Accessories:One Shield; Basic Dynamic Radial Load Rating C:48800 N; d:50.000 mm; Fillet Radius ra:1.00 mm; D:90.0000 mm; B:30.20 mm; Basic Static Radial Load Rating Co:39000 N; Oil Speed Rating n2:6300 rpm; Sealed Speed Rating n3:4800 rpm; Grease Speed Rating n1:4800 rpm; |
| NU304, NU304E, NU304M, NU304EM,NU304ECP 20x52x15 Mm Cylindrical Roller Bearing | db:24.5 mm; Db:25.6 mm; Mass bearing:0.076 kg; E:29 mm; d:20 mm; Reference speed:16000 r/min; Da:29.5 mm; da:28.4 mm; s max.:0.5 mm; B:17 mm; |
| FAG NU2232-E-M1-C3 Bearing | Dimension S1:18.3 mm; Dimension N:19.8 mm; Width A:34.9 mm; Pin Dia A1:6.4 mm; Dimension C:66.7 mm; Dimension B:79.4 mm; Insert Bearing IB:Stainless Steel; Weight W:0.32 kg; Dimension H:22.2 mm; Dimension G:11.1 mm; |
| NU426M Bearing | d:17.000 mm; Basic Dynamic Radial Load Rating C:4360 N; Oil Speed Rating Open/Shielded n2:28000 rpm; Basic Static Radial Load Rating Co:2320 N; D:30.0000 mm; Fillet Radius ra:0.30 mm; B:7.00 mm; Sealed Speed Rating n3:14000 rpm; Grease Speed Rating Open/Shielded n1:22000 rpm; Accessories:Without Accessories; |
| FC3248168A Mill Four Row Cylindrical Roller Bearing | Width C:15 mm; Fillet Radius ra:1.00 mm; d:25.000 mm; D:52.0000 mm; Basic Dynamic Radial Load Rating:14300 N; Grease or Oil Speed Rating n1:8000 rpm; Basic Static Radial Load Rating Co:4000 N; B:44.00 mm; |
| 541647 Four Row Cylindrical Roller Bearing | Attainable speed for oil-air lubrication:165000 r/min; Da max.:24 mm; Fatigue load limit Pu:0.05 kN; D:26 mm; B:8 mm; d:10 mm; Calculation factor f:1.03; Calculation factor f1:1; Number of balls z:11; Static axial stiffness, preload class C:29 N/µm; |
| NU1040ML BEARING 200x310x51mm | End plug (suffix Y):X-5217-2; P90°:414 kN; Housing:SSAFS 052 KA; Max. speed for Taconite seal:325 r/min; Pa:81.4 kN; Ca:117.805 mm; Da:399.999 mm; Cap bolt recommended tightening torque:4284.4 N·m; Initial grease fill:2749.95 g; Eye bolt:2 x 1/2-13 UNC; |