No. | Brand | M | l | L | G | J | b | F | t |
1220X2440/9mm/10mm/11mm/12mm/15mm/16mm/17mm/18mm/21mm | - | - | - | - | - | - | - | - | - |
34412866 | - | - | - | - | - | - | - | - | - |
18mm | - | - | - | - | - | - | - | 481.5 mm | - |
4s | - | - | - | 167.488 mm | - | - | - | - | - |
W61907-2RS1 | SKF | - | - | - | M 75x2 | - | - | - | - |
4X8 | - | - | - | - | - | - | - | - | - |
MR137 | - | - | - | - | - | - | - | - | - |
Kit~2014 | John Deere | - | - | - | - | - | - | - | - |
713 | fag | - | - | - | - | - | - | - | - |
625 | NTN | - | - | - | - | - | 3.1 mm | - | - |
10x | - | - | - | - | M 14x1.5 | - | - | - | - |
PC130-8 | - | - | - | - | - | - | - | - | - |
A11VO | Rexroth | - | - | - | - | - | - | - | - |
80 | - | - | - | - | - | 116.5 mm | - | - | - |
B522ABH53A | Parker | - | - | - | M 200x3 | - | - | - | - |
PC75UU | INA | - | - | - | - | - | - | - | - |
206 | - | - | - | - | - | - | - | - | - |
G2 | - | - | - | - | - | - | - | - | - |
340x620x224 | - | - | - | - | - | - | - | - | - |
2-6mm | - | - | - | - | - | - | - | - | - |
DPHE-1,DPHE-2,DPHE-3,DPHE-4,DPHE-6 | - | 6.5 mm | - | - | - | - | 9.3 mm | - | - |
D260 | - | - | - | - | - | - | - | - | - |
SL04160-PP Bearing | Reference speed:19000 r/min; Fw:20 mm; Ew:26 mm; Designation associated G design radial shaft seal with a low cross-sectional height:G 20x26x4; Limiting speed:22000 r/min; Mass needle roller and cage assembly:0.011 kg; U:12 mm; Designation associated SD design radial shaft seal with a low cross-sectional height:SD 20x26x4; Fatigue load limit Pu:1.96 kN; Basic dynamic load rating C:12.8 kN; |
N307 Bearings | Sealing solution:Triple-lip seals; Basic static load rating C0:1500 kN; Specific dynamic load factor K:100 N/mm²; b1:8 mm; r2 min.:1 mm; Design (sliding contact surface combination):Steel/steel; r1 min.:0.6 mm; Specific static load factor K0:300 N/mm²; Da min.:104.8 mm; ra max.:0.6 mm; |
NU419 Cylindrical Roller Bearing 95*240*55mm | Oil:1 429 min-1; Pu:3044.890 kN; Dynamic (Cr):7792 kN; Static (Cor):45515 kN; d:340 mm; Bearing designation:T-49768 ; D:640 mm; Grease:1 020 min-1; B:140 mm; Weight:291 kg; |
NJ 2326 Cylindrical Roller Bearing | D1:163 mm; rs (min):1.5 mm; H:51 mm; static Cor:874.000 kN; d1:222 mm; dynamic Cr:288.750 kN; d:160 mm; Grease:890 min-1; Pu:28.630 kN; Oil:1 200 min-1; |
SL182920 Cylindrical Roller Bearing 100x140x24mm | Adapter sleeve assembly:SNW 134x5.15/16; H2:69.85 mm; J max.:549.275 mm; P180°:92.5 kN; J1:107.95 mm; Initial grease fill:878.85 g; Taconite seal:TER 140; Cap bolt recommended tightening torque:203.4 N·m; Da:309.999 mm; Appropriate attachment bolt size G:1 in; |
NJ314, NJ314E, NJ314M, NJ314ECP, NJ314ETVP2 Cylindrical Roller Bearing | B:80 mm; F:350 mm; r, r1,2 min.:2.1 mm; Mass inner ring:9.8 kg; d:320 mm; |
NN3080KTN9/SPW33 Cylindrical Roller Bearing 400x600x148mm | B1:45 mm; Mass adapter sleeve assembly:0.34 kg; d3:75 mm; Lock nut:KMFE 11; B:14 mm; d:55 mm; d1:50 mm; G:M 55x2; Hydraulic nut:HMV 11 E; |
N315, N315E, N315M, N315ECP, N315ETVP2 Cylindrical Roller Bearing | Fillet Radius ra:1.00 mm; D:52.0000 mm; B:20.60 mm; Sealed Speed Rating n3:8000 rpm; Accessories:Two Seals & Snap-Rin; d:25.000 mm; Grease Speed Rating n1:8000 rpm; Basic Static Radial Load Rating Co:14000 N; Basic Dynamic Radial Load Rating C:20800 N; Oil Speed Rating n2:11000 rpm; |
Cylindrical roller bearings
SKF cylindrical roller bearings are available in many designs, series and sizes. The major design differences between the bearings presented in this section are
cylindrical roller bearing catalog tc ylindrical r oller ... - Timken
www.timken.com for the most recent version of the cylindrical roller Bearing catalog. TABLE 1. RADIAL CYLINDRICAL ROLLER BEARING. TYPES AND SIzES
Cylindrical & Single Row Roller Bearings | AST Bearings
Cylindrical Roller Bearings are bearing in which cylinders are used as the rolling elements as opposed to balls in ball bearings
Cylindrical Roller Bearings | Roller Bearings | Products | NSK
In bearings of this type, the cylindrical rollers are in linear contact with the raceways. They have a high radial load capacity and are suitable for high speeds
Cylindrical Bearings | The Timken Company
These are the true tests of any bearing. Our comprehensive line of single-, double- and multi-row Timken® cylindrical roller bearings helps extend equipment life
Cylindrical Roller Bearings - Radial Roller Bearings
Cylindrical Roller Bearings are designed to carry heavy radial loads. These bearings are made with a single row, two rows, or multi-rows of rolling elements to
Cylindrical Roller Bearings | NTN Bearing
Cylindrical roller bearings have rollers that provide a modified line contact with the cylindrical inner and outer ring raceways, while the rollers are guided by
NUP 205 ECP Cylindrical Roller Bearing 25*52*15 Video