| NU414E Bearing 70x180x42mm | B:142.875 mm; rb max.:1 mm; M:6.5 mm; Sealing solution:Double-lip seals; b1:8 mm; C:71.425 mm; da max.:116.6 mm; Mass plain bearing:7.6 kg; Da min.:131.4 mm; Material constant KM:330; |
| N1008-K-HS-PVPA-SP-H193Bearing 40x68x15mm | Oil Speed Rating Open/Shielded n2:4500 rpm; D:150.0000 mm; Basic Static Radial Load Rating Co:32500 N; B:16.00 mm; d:120.000 mm; Sealed Speed Rating n3:2400 rpm; Grease Speed Rating Open/Shielded n1:3800 rpm; Basic Dynamic Radial Load Rating C:29100 N; Accessories:One Shield; Fillet Radius ra:1.00 mm; |
| NU1011M Bearing 55X90X18mm | RG:1 NPT; H1:200.025 mm; Mass pillow block:170 kg; N1:34.925 mm; J1:114.3 mm; P150°:94.3 kN; L:711.2 mm; Eye bolt:2 x 1/2-13 UNC; Max. speed for PosiTrac Plus seal:825 r/min; P120°:107 kN; |
| NU2304 Bearing 20x52X21mm | A1:158.75 mm; Adapter sleeve assembly:SNW 32x5.1/2; P60°:345 kN; Max. speed for Taconite seal:560 r/min; H2:66.675 mm; S:4.763 mm; Cap bolt:7/8-9 UNC; R2:33.337 mm; Stabilizing ring:SR-32-0; ba:70.644 mm; |
| NN3020K/W33 Cylindrical Roller Bearing 100x150x37mm | Grease Speed Rating Open/Shielded n1:12000 rpm; Basic Dynamic Radial Load Rating C:13300 N; B:13.00 mm; Oil Speed Rating Open/Shielded n2:15000 rpm; D:55.0000 mm; d:30.000 mm; Fillet Radius ra:1.00 mm; Accessories:One Seal; Sealed Speed Rating n3:8000 rpm; Basic Static Radial Load Rating Co:8300 N; |
| SL014880 Cylindrical Roller Bearings 400x500x100mm | Fw:58 mm; U:18 mm; Basic static load rating C0:71 kN; Limiting speed:8000 r/min; Fatigue load limit Pu:8.65 kN; Mass needle roller and cage assembly:0.052 kg; Reference speed:7000 r/min; Ew:65 mm; Basic dynamic load rating C:33.6 kN; |
| NJ406 Cylindrical Roller Bearing | Oil:256.260 kN; d:280 mm; Grease:3060 kN; Static (Cor):16.7 mm; rs (min):4 mm; with tapered bore:1 100 min-1; D:420 mm; Dynamic (Cr):9 mm; B:106 mm; Pu:1820 kN; |
| NU211, NU211E, NU211M, NU211ETVP2, NU211ECP Cylindrical Roller Bearing | N1:28.575 mm; Cap bolt:4 x 3/4-10 UNC; da:160.338 mm; J1:117.475 mm; PG:1/4 NPT; J min.:530.225 mm; Stabilizing ring:SR-36-30; Pa:46.3 kN; Cap bolt recommended tightening torque:203.4 N·m; P120°:84.5 kN; |