| N1012M Bearing 60X95X18mm | P150°:32 kN; Adapter sleeve assembly:SNW 117x2.13/16; ba:38.894 mm; Bearing limiting speed:4800 r/min; P90°:56.5 kN; RG:3/8 NPT; R1:65.088 mm; h:47.625 mm; P180°:38.3 kN; Housing:SAF 617; |
| NU216E Cylindrical Roller Bearing 80*140*26mm | l7 min.:40 mm; G:M 36x3; Basic static load rating C0:134 kN; B:25 mm; Specific dynamic load factor K:150 N/mm²; r1 min.:0.6 mm; α:6 °; d4 ≈:49 mm; l3 min.:60 mm; l5 ≈:25 mm; |
| NU230 Cylindrical Roller Bearing 150x270x45mm | Sealed Speed Rating n3:5000 rpm; Basic Static Radial Load Rating Co:43000 N; Fillet Radius ra:1.50 mm; D:90.0000 mm; Basic Dynamic Radial Load Rating C:60500 N; Oil Speed Rating n2:6700 rpm; Grease Speed Rating n1:5000 rpm; B:36.50 mm; d:40.000 mm; Accessories:Two Seals & Snap-Rin; |
| SL 18 5013 Bearing | Insert Bearing IB:Stainless Steel; Dimension B:104.8 mm; Basic Static Radial Load Rating Co:11200 N; Dimension J:7.9 mm; Dimension D2:68.3 mm; Dimension H:25.4 mm; Dimension G:12.7 mm; Dimension S1:22.2 mm; Width A:34.9 mm; Dimension N:19.8 mm; |
| Four Row Cylindrical Roller Bearing FC3652168 | Fillet Radius ra:1.00 mm; Basic Dynamic Radial Load Rating C:28600 N; Accessories:Two Seals; Basic Static Radial Load Rating Co:20400 N; D:62.0000 mm; Oil Speed Rating n2:9500 rpm; Grease Speed Rating n1:7000 rpm; d:30.000 mm; Sealed Speed Rating n3:7000 rpm; B:23.80 mm; |
| N428 Cylindrical Roller Bearing | Fatigue load limit Pu:1.27 kN; Calculation factor f2B:1.03; Calculation factor f2A:1; Number of balls z:28; Static axial stiffness, preload class C:189 N/µm; Calculation factor fHC:1.01; Mass bearing:1.11 kg; r1,2 min.:1.5 mm; Static axial stiffness, preload class A:87 N/µm; Basic static load rating C0:32 kN; |
| NF1026M Bearing 130x200x33mm | J max.:333.375 mm; P180°:71.2 kN; Ca:55.804 mm; Cap bolt recommended tightening torque:298.3 N·m; H1:114.3 mm; h:40.481 mm; Initial grease fill:181.44 g; R1:65.088 mm; J1:60.325 mm; Adapter sleeve assembly:SNW 3024x4; |
| NU202ECP/E/EM | Dimension A2:0.5625 in; Distance J:5.1250 in; Weight W:2.85 lb; Diameter N:0.5625 in; Height H:6.1250 in; Shaft Diameter D:1 1/4 in; Insert Bearing IB:ZMaRC; Dimension L:3.6250 in; Dimension DA:3.5000 in; Basic Static Radial Load Rating Co:3440 lbf; |