| Cylindrical Roller Bearing NN3026 | M:27.5 mm; Mass lock washer:0.008 kg; d1:38 mm; f:5 mm; B:1.25 mm; d2:49 mm; d:30 mm; |
| NU205 Cylindrical Bearing 25x52x15mm | Mass bearing:265 kg; Fatigue load limit Pu:1040 kN; Basic dynamic load rating C:5280 kN; D1 ≈:550 mm; D:595 mm; Calculation factor Y1:2.2; Thrust factor K:1.82; B:368 mm; Comparative axial load rating CFa:206 kN; Basic static load rating C0:13700 kN; |
| NU216, NU216E, NU216M, NU216ECP,NU216ETVP2 Cylindrical Roller Bearing | Reference speed:3200 r/min; d:80 mm; T:74 mm; Calculation factor e:0.43; Limiting speed:4800 r/min; Da min.:114 mm; rc max.:0.6 mm; r5 min.:0.6 mm; D:130 mm; da max.:89 mm; |
| NNU4924-S-K-M-SP Bearing 120x165x45 Mm | P120°:1700 kN; Eye bolt, size:2 x M 24; Ca:164 mm; Q180°:1430 kN; P150°:1500 kN; Cap bolt, size:M 30x200; P0°:3800 kN; P180°:1900 kN; J6:720 mm; P55°:4700 kN; |
| N218 Bearing 90*160*30mm | L:279.4 mm; P180°:14.2 kN; RG:1/4 NPT; R2:25.4 mm; Pa:6.94 kN; Stabilizing ring:SR-13-11; P60°:35.6 kN; da:49.212 mm; N1:15.875 mm; Contact seal:2 x B9784-19; |
| 65 mm x 120 mm x 23 mm 81124TN Thrust Cylindrical Roller Bearings | Radial shaft seal:Available on request; C:100 mm; r1,2 min.:2.1 mm; Limiting speed:1000 r/min; Fatigue load limit Pu:270 kN; Reference speed:900 r/min; Basic dynamic load rating C:968 kN; Mass bearing:26 kg; Fw:415 mm; Basic static load rating C0:3000 kN; Size (mm):65 mm x 120 mm x 23 mm ; |
| N209EM Roller Bearing | d:20.000 mm; Grease Speed Rating Open/Shielded n1:11000 rpm; Basic Dynamic Radial Load Rating C:15900 N; D:52.0000 mm; B:15.00 mm; Accessories:Two Shields; Fillet Radius ra:1.00 mm; Oil Speed Rating Open/Shielded n2:14000 rpm; Basic Static Radial Load Rating Co:10200 N; |
| N1952-K-M1-SP Bearing 260x360x46mm | Grease Speed Rating n1:4500 rpm; Basic Dynamic Radial Load Rating C:72800 N; Accessories:Two Seals & Snap-Rin; d:80.000 mm; Oil Speed Rating n2:5300 rpm; B:26.00 mm; Oil Speed Rating Open/Shielded n2:5300 rpm; Sealed Speed Rating n3:3000 rpm; Fillet Radius ra:2.00 mm; Grease Speed Rating Open/Shielded n1:4500 rpm; |