| 25UZ854359 T2 Eccentric Roller Bearing 25x68.5x42mm | Ball Type:STEEL; Contact Angle:15 º; Bearing Width:18 mm; Bearing Weight:0.56 Kg; do - Ball Diameter:9.525 mm; Cage Type:CR - Phenolic Outer; Ce - Dynamic Radial Rating1:38700 N; R - Inner Ring To Clear Radius2:1.0 mm; da - Inner Ring Backing Diameter:92.800 mm; D:120 mm; |
| 40943YEX Eccentric Bearing | db - Cone Backface Backing Diameter:15.12 in; Design Units:Imperial; C0 - Static Radial Rating:790000 lbf; da - Cone Frontface Backing Diameter:14.17 in; Aa - Cage-Cone Backface Clearance:1.01 in; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:203000 lbf; G2 - Heat Generation Factor (Rib-Roller End):161.7; a - Effective Center Location4:2.17 in; d:12 in; B - Cone Width:4.7500 in; |
| E-95UZS221 Eccentric Bearing 85x158x36mm | Flange Shape:Compact Type; Number of Bearings:Double; Seals:DD (Contact Rubber S; Type:Bearings with Housin; Bearing Retained:No; Width T(mm):30 ～ 70; Shape:Flanged Pilot Type; Bearing Material:[Steel] Steel; Holder Surface Treatment:Clear Anodize; |
| 626 GXX Eccentric Bearings 140×269×62 | Limiting Speed - Oil:2,600 rpm; db (min):164 mm; Bore Type:Cylindrical Bore; D:270 mm; Limiting Speed - Grease:2,000 rpm; Dynamic Load Rating:545,000 N; dd (min):196 mm; Inside Ring Outside Diameter:182 mm; Configuration:Single Row; db (max):179 mm; |
| 6322M/C3VL0241 Insulated Bearings 110x240x50mm | Bearing Inner Dia. Shape:Cylindrical Bore Set; Basic Load Rating, Static Rating(N):6650; Fit:J7; Seal:Triple seals; Unit, Type:Insert Bearing Unit; Days to Ship:8 Days; d:20; Bearing Unit, Type:Take-Up Type; |
| 15UZE20911T2 Eccentric Bearing 15x40.5x14mm | Seals:VV (Non-Contact Rubb; Bearing Used:Deep Groove Ball Bea; Shape:Flange Type; Type:Bearings with Housin; Bearing Material:[Steel] Steel; Flange Shape:Compact Type; Volume Discount:Available; Bearing I.D. d(mm):12; Days to Ship:7 Days; |
| 2LV45-1A Excavator Gearbox Bearing / Eccentric Bearing 45x100x68mm | K - Factor7:1.76; da - Cone Frontface Backing Diameter:10.73 in; B - Double Cone Width:5.1250 in; d:10.0000 in; Ab - Cage-Cone Frontface Clearance:0.17 in; Aa - Cage-Cone Backface Clearance:0 in; Cup Part Number:M249710X; Bearing Weight:90.6 lb; Cg - Geometry Factor12:0.153; G1 - Heat Generation Factor (Roller-Raceway)11:1630; |
| 61687 YSX Eccentric Roller Bearing 35x86x50mm | Flange Shape:Round Type; Bearing I.D. d(mm):15; Type:Bearings with Housin; Days to Ship:7 Days; Housing Material:[Aluminum Alloy] 201; RoHS:6; Seals:ZZ (Double Shield); Number of Bearings:Single; Bearing Used:Deep Groove Ball Bea; |