| Supply 7022/P4 Angular Contact Ball Bearing 110*170*28mm | Brand:CX; Compatibility:DAIHATSU / CHARADE; Bearing number:CX697; Designation SKF:VKBA 3962; |
| 7016C TYN 2RZ P4 SUL 80X125X22mm Angular Contact Ball Bearing | Da (max):201 mm; r1:3 mm; Limiting Speed - Oil:3,000 rpm; Static Load Rating:715,000 N; Configuration:Single Row; Limiting Speed - Grease:2,400 rpm; Inside Ring Outside Diameter:127.5 mm; db (min):114 mm; dc (min):132 mm; Bore Type:Cylindrical Bore; |
| 45TAC75BDBC9PN7A Ball Screw Support Ball Bearing 45x75x30mm | d:34,925 mm; Bore Diameter (mm):34,925; Size (mm):34.925x65.088x18.034; Bearing number:LM48548RS/LM48510; Brand:Fersa; Width (mm):18,034; D:65,088 mm; Outer Diameter (mm):65,088; |
| 7006 ACD/HCP4A Angular Contact Ball Bearing Size 30x55x13 Mm 7006ACD/HCP4A | Bearing number:RLM8510525-1; Bore Diameter (mm):85; Basic dynamic load rating (C):79 kN; Outer Diameter (mm):105; C:25 mm; Fw:85 mm; Brand:NSK; D:105 mm; r min.:1 mm; Width (mm):25; |
| VEX80/NS7CE1 Angular Contact Ball Bearing 80*125*22mm Manufacturer | Wall Thickness (S3):2.418; Bearing Outside Diameter, Nominal(Do):155.000; Average Clearance (Cd):0.2170; Housing Bore Dia. (Dh) - 155 +0.040 / -0:155 +0.040 / 0; Bearing Length Tolerance (B tol.) - +0 / -0.40:+0 / 0.40; Bearing Type:straight; Bearing number:AST20 15060; ID Chamfer Length (Ci):0.800; Lube Hole Dia. (dl):9.500; ID Chamfer Angle (B deg.):45; |
| 30 mm x 72 mm x 19 mm 234436-M-SP Angular Contact Thrust Ball Bearings 180*280*120mm | ra (max):1.5 mm; Limiting Speed - Grease:5,000 rpm; Dynamic Load Rating:230,000 N; Radial Clearance:0.055 to 0.075 mm; Enclosure:Open; Axial Load Factor Y0:1.79; da (min):53.5 mm; Limiting Speed - Oil:5,900 rpm; Constant e:0.37; Retainer Material:Pressed Steel; Size (mm):30 mm x 72 mm x 19 mm ; |
| 7005 ACD/P4AH Angular Contact Ball Bearing Size 25x47x12 Mm 7005ACD/P4AH | D:5 in; C - Double Cup Width:2.5625 in; r - Cup Frontface To Clear Radius2:0.06 in; K - Factor3:1.61; e - ISO Factor4:0.36; Cg - Geometry Factor7:0.117; Da - Cup Frontface Backing Diameter:4.72 in; Y2 - ISO Factor6:2.76; Y - ISO Factor1:1.65; Design Units:Imperial; |
| 7200 CD/HCP4A Spindle Bearing 10x30x9 Mm Angular Contact Ball Bearing 7200CD/HCP4A | Bearing:22232K; Shaft Diameter d:5 7/16 in; Housing:SNT 532; H2:60.00 mm; Locating Rings (width x OD):SR290X17; A1:160 mm; J:470 mm; Max Grease Speed:1800; Material :Cast Iron; N:35 mm; |