| ZKLN3572-2RS-2AP Bearing Size 35x72x68 Mm Axial Angular Contact Ball Bearing ZKLN 3572 2RS 2AP | B:14 mm; Fatigue load limit (Pu):0,245; Brand:SNFA; r3 min.:0,3 mm; r1 min.:1 mm; db min:25,6 mm; Width (mm):14; Size (mm):20x47x14; (Grease) Lubrication Speed:36 000 r/min; Bearing number:E 220 /S /S 7CE1; |
| X-Life 176724 Four Point Contact Bearing Air Compressor Bearing | C:15.880 mm; Basic static load rating (C0):15.7 kN; b:13.7 mm; Width (mm):15.880; Brand:KOYO; Bore Diameter (mm):17.462; D:22.225 mm; Size (mm):17.462x22.225x15.880; Outer Diameter (mm):22.225; Weight:0,013 Kg; |
| 75 mm x 115 mm x 20 mm 40TAC90BDDGDTDC10PN7B Ball Screw Support Ball Bearing 40x90x60mm | Dimension N:10.5 in; Dimension T:12.0 in; Cr - Dynamic Load Rating:37768 lbf; Note:This product line wa; Dimension X:0.9 in; Ca - Axial Load Rating:1978 lbf; Seal Type:Kevlar Packing Seal; Tensioning Unit Type:Tension Type; Dimension D:9.0 in; Shaft Size:55 mm; Size (mm):75 mm x 115 mm x 20 mm ; |
| 240TAC29D+L Angular Contact Ball Bearings 240×320×96mm | Width (mm):120,000; Outer Diameter (mm):360,000; d:170,000 mm; Bearing number:22334EF802; Size (mm):170x360x120; Bore Diameter (mm):170,000; Brand:SNR; H:120,000 mm; D:360,000 mm; |
| 55TAC100BDDGDUC9PN7B Ball Screw Support Ball Bearing 55x100x40mm | C:35 mm; Bore Diameter (mm):68; Basic dynamic load rating (C):78 kN; Brand:NSK; Fw:68 mm; Size (mm):68x82x35; Width (mm):35; D:82 mm; Basic static load rating (C0):169 kN; Bearing number:RLM688235-1; |
| QJ308 Angular Contact Ball Bearing 40x90x23mm | S:15,9 mm; Basic static load rating (C0):11,3 kN; J:40 mm; H1:50 mm; H2:55 mm; L:78 mm; Weight:0,92 Kg; A2:17 mm; Bolt (G):M8; A:29 mm; |
| ZKLF3080-2RS-2AP Axial Angular Contact Ball Bearing | D:140 mm; Outer Diameter (mm):140; Basic static load rating (C0):212 kN; Weight:3,25 Kg; Size (mm):65x140x48; (Grease) Lubrication Speed:3800 r/min; Bore Diameter (mm):65; d:65 mm; Width (mm):48; B:48 mm; |
| 7202 CD/HCP4A Angular Contact Ball Bearing Size 15x35x11 Mm 7202CD/HCP4A | Y1 - ISO Factor5:1.43; Cg - Geometry Factor8:0.106; G1 - Heat Generation Factor (Roller-Raceway)7:182; D:6.6250 in; Y - ISO Factor1:1.28; e - ISO Factor4:0.47; Da - Cup Frontface Backing Diameter:6.34 in; Design Units:Imperial; Y2 - ISO Factor6:2.14; Series:675; |