| 234952BM/SP Angular Contact Ball Bearings 260×360×120mm | Size (mm):25x52x44.3; H1:4,3 mm; s:17,4 mm; Outer Diameter (mm):52; e:0,6 mm; Basic dynamic load rating (C):14 kN; Thread (G):M6x1; B:44,3 mm; m:5 mm; Weight:0,25 Kg; |
| 50TAB10 Ball Screw Support Ball Bearing 50x100x20mm | c2 min.:0.2 mm; α ±8:20 °; M:3 mm; B:25 mm; Size (mm):22x25x25; Minimum Buy Quantity:N/A; Tolerance shaft:h8; Width (mm):25; c2 max.:1 mm; Specific static load factor K0:250 N/mm²; |
| QJ203 Angular Contact Ball Bearing 17x40x12mm | Long Description:1-11/16" Bore 1; Component Description:Roller Assembly Plus; Category:Thrust Ball Bearing; Height:0.875 Inch | 22.225; Ca:12600 lbf / Dynamic; C0a:27500 lbf / Static l; Outside Diameter:2.969 Inch | 75.413; D:2,969 inch; T:0,875 inch; d:1 11/16 inch; |
| F-800821 Angular Contact Ball Bearing | Brand:CX; d:95 mm; Weight:13,34 Kg; Outer Diameter (mm):200; Bore Diameter (mm):95; B1:90 mm; Angle (α):15 °; D:200 mm; Basic static load rating (C0):319 kN; Size (mm):95x200x90; |
| QJF1040X1MA/P5 Angular Contact Ball Bearing | Basic static load rating (C0):1000 kN; B:69 mm; Width (mm):69; d:670 mm; Weight:77,5 Kg; Bore Diameter (mm):670; Size (mm):670x820x69; Bearing number:618/670; Brand:CX; D:820 mm; |
| 7205 CD/P4A Angular Contact Ball Bearing Size 25x52x15 Mm 7205CD/P4A | Lubrication Type:Non-Relubricatable; Set Screw Size:M10x1.5; Radius r:0.6 mm; Shaft Size d:1.969 in; Material:Bearing Steel; Seal Type:Shroud Seal; Weight:0.50 lb; Angle between Set Screws:90 º; Outside Diameter D:3.543 in; Outside Ring Width C:20.000 mm; |
| HC7010-C-T-P4S Ceramic Spindle Bearing / Angular Contact Bearing 50x80x16mm | r1 min.:2.1 mm; Size (mm):100x180x34; r min.:2.1 mm; Width (mm):34; Outer Diameter (mm):180; Brand:NACHI; Fw:120 mm; d:100 mm; Basic dynamic load rating (C):183 kN; Bore Diameter (mm):100; |
| 71910 CB/HCP4AL Angular Contact Ball Bearing Size 50x72x12 Mm 71910CB/HCP4AL | Characteristic inner ring frequency, BPFI:6.32 Hz; Characteristic rolling element frequency, BSF:5.93 Hz; Bore Diameter (mm):65,000; Contact angle α:25 °; Outer Diameter (mm):120,000; Characteristic cage frequency, FTF:0.42 Hz; da max:82 mm; a:59.8 mm; Nref:4,800 rpm; Mass:1.52 kg; |