| ABEC-3 Quality QJF 1024X1 N2MA Four Point Angular Contact Ball Bearing | Ce - Dynamic Radial Rating1:5300 N; Da - Outer Ring Backing Diameter:23.200 mm; da - Inner Ring Backing Diameter:13.300 mm; Limiting Speed (Oil):123400 rpm; Limiting Speed (Grease):61700 rpm; r - Outer Ring To Clear Radius3:0.3 mm; do - Ball Diameter:4.762500 mm; Design Units:METRIC; D:26.000 mm; Ball Type:STEEL; |
| 7205CTRV1VSULP3 Seals Type Angular Contact Ball Bearing 25x52x15mm | DA2:5.741; C0:26.3; BET21:4; ra max.:1,5 mm; DA1:6.606; Weight:0,123 Kg; SDM_:29.142; DI_:23.022; ra1 max.:1,5 mm; hidYobi:17580/17520; |
| QJS 309-XL-MPA Angular Contact Ball Bearing With Locating Slots | D:57,15 mm; Max operating temperature, Tmax:120 °C; r1a max:1.5 mm; T:17,462 mm; Characteristic rolling element frequency, BSF:6.17 Hz; Y0:0.95; C:13,495 mm; Dynamic load, C:39.5 kN; d:26,988 mm; Mass:0.2 kg; |
| 60TAB12U Ball Screw Support Ball Bearing 60x120x20mm | R - Cone Frontface To Clear Radius2:0.130 in; d:12 in; Series:M257100; Cg - Geometry Factor8:0.167; C0 - Static Radial Rating:477000 lbf; Design Units:Imperial; K - Factor7:1.76; da - Cone Frontface Backing Diameter:12.8 in; B - Double Cone Width:5.1250 in; Cone Part Number:M257148DW; |
| BA290-1SA Excavator Bearing / Angular Contact Ball Bearing 290x355x32.5mm | r5 min.:1,1 mm; Bearing number:6305-2RS1; Weight:0,217 Kg; Outer Diameter (mm):62; Basic static load rating (C0):11,4 kN; D:62 mm; Basic dynamic load rating (C):22,5 kN; d2:32,7 mm; B:17 mm; C:17 mm; |
| 7003 CE/HCP4A Angular Contact Ball Bearing Size 17x35x10 Mm 7003CE/HCP4A | D1:161 mm; Bore Diameter (mm):190; Calculation factor e:0.33; Recommended lock nut tightening angle α:150 °; outside diameter:190 mm; finish/coating:Uncoated; d:90 mm; lubrication hole type:Lubrication Groove &; cage material:Steel; dynamic load capacity:610 kN; |
| 50TAC100BDFDC10PN7A Ball Screw Support Ball Bearing 50x100x60mm | Di:953 mm; Bearing number:ESA 25 0955; diZT:857 mm; DiZT:955 mm; Outer Diameter (mm):1096; Z:120 mm; d0:1080 mm; Bore Diameter (mm):855; D:1096 mm; nB:30 mm; |
| Подшипник 30228 (7228) Angular Contact Ball Bearing 140x250x42mm | NC-DA:0; Fw:8 mm; GRS rpm:26000; NC-SLR:0; C1_C2:0.8; D:12 mm; d:8; (Grease) Lubrication Speed:26000 r/min; ND-Z:0; Prod_Type3:NRB_DC_FJ-MFJ_WC_CT; |