| No. | Brand | k | s | a | r | m | c | L | A |
| 22x11 | - | - | - | - | - | - | - | - | - |
| AL202209 | John Deere | - | - | - | - | - | - | - | - |
| 23228CAC2BRW33 | SKF | - | - | - | - | - | - | - | - |
| 20X32X7 | INA | - | - | - | - | - | - | - | 36 mm |
| RET114 | Timken | - | - | - | - | - | - | - | - |
| 2 | koyo | - | - | - | - | - | - | - | - |
| 22319MB | - | - | - | - | - | - | - | - | - |
| 50PC | - | - | - | - | - | - | - | 120 mm | 48 mm |
| 14 | - | - | - | - | - | - | - | 150 mm | - |
| (512533) | - | - | - | - | - | - | - | - | - |
| 20 | - | - | - | - | - | - | - | 320 mm | - |
| 1200X1000 | - | - | - | - | - | - | - | - | - |
| 510079 | Timken | - | - | - | - | - | - | - | - |
| 6206JEM, | SKF | - | - | - | - | - | - | - | - |
| A101824 | Thomson | - | - | - | - | - | - | - | - |
| 10 | - | - | - | - | - | - | - | - | - |
| 122X244cm | - | - | - | - | - | - | - | - | - |
| 160CY14-1B | INA | - | - | - | - | - | - | - | - |
| XVZ1300 | - | - | - | - | - | - | - | - | - |
| A4vg180 | Rexroth | - | - | - | - | - | - | 116 mm | - |
| 4x10x4 | - | - | - | - | - | - | - | 219 mm | 60 mm |
| PC220-7 | - | - | - | - | - | - | - | - | - |
| 933-17317-71-00 | - | - | - | - | - | - | - | - | - |
| 6202 | SKF | - | - | - | - | - | - | - | - |
| 4x8x3mm | - | - | - | - | - | - | - | - | - |
| SK07-2 Kobelco Excavator Accessories Bearing | L:80 mm; Recommended tightening torque for set screw:3.7 Nm; T min.:-20 °C; C0:11.2 kN; Designation of bearing:US206-19G2; S:8 mm; Designation of housing:FLE206N-; s1:15 mm; N:11,5mm; J:116.5 mm; |
| AC5033 Excavator Bearing 250x330x38mm | Y0:2.04; Brand:SNR; B:60 mm; Characteristic outer ring frequency, BPF0:6.11 Hz; b:11 mm; Y2:3.11; D1:156.7 mm; Characteristic rolling element frequency, BSF:5.1 Hz; Number of lubrication holes:3; Fatigue limit load, Cu:52.6 kN; |
| 230BA30-2 Excavator Bearing 230x300x35mm | Unit, Type:Insert Bearing Unit; Bearing Unit, Type:Square flange shape; Unit Body Material:Cast Iron; Accessory:With steel plate cov; Surface Treatment:No; Seal:Triple seals; Stroke:No; Rolling Element Material:Bearing Steel; Fit:J7; Bearing Inner Dia. Shape:Tapered hole adapter; |
| PC100-5 Komatsu Komatsu Excavator Accessories Bearing | Days to Ship:9 Days; Seal:Nitrile; Fit:J7; Unit, Type:Insert Bearing Unit; Accessory:No Cover; Stroke:No; Surface Treatment:No; Bearing Inner Dia. Shape:Cylindrical Bore Set; Basic Load Rating, Dynamic Rating(N):133000; |
| BA300-6SA Excavator Bearing / Angular Contact Bearing 300x380x44mm | Bearing Type:Split Cylindrical Ex; Dimension H1:2.4 in; Cr - Dynamic Load Rating:356772 lbf; Note:This product line wa; Bolt Size:8 x M30; Housing Width:10.6 in; Shaft Size:11.5 in; Dimension J2:22.3 in; Dimension M:13.0 in; Support Type:Eight-Bolt Plummer B; |
| High Quality AC5836 289*355*34mm Excavator Bearing | Surface Treatment:Electroless Nickel P; Volume Discount:Available; Material:1045 Carbon Steel; RoHS:6; Shape:Round Flanged Type w; I.D. V(φ):11; Days to Ship:8 Days; |
| SF4852PX1#CA Excavator Bearing 240x310x33mm | Seals:DD (Contact Rubber S; Type:Bearings with Housin; Number of Bearings:Double; Bearing Part Number:628; Volume Discount:Available; Holder Surface Treatment:Black Oxide Coating; Bearing Retained:Yes (with retaining; Flange Shape:Square Type; Bearing Used:Deep Groove Ball Bea; |
| BA115-1A Excavator Bearing 115x155x22mm | Stroke:No; Fit:J7; Surface Treatment:No; Unit, Type:Insert Bearing Unit; Rolling Element Material:Bearing Steel; Days to Ship:Quote; Machining:No; |
Okoume Marine Plywood: BS 1088 Quality - 3mm, 4mm, 6mm
4mm, 5/32", 13 lbs, 3, BS1088. 6mm, 1/4", 21 lbs, 5, BS1088. 9mm, 3/8", 31 lbs, 5, BS1088. 12mm, 1/2", 42 lbs, 7, BS1088. 18mm, 3/4", 62 lbs, 11, BS1088
Marine Plywood - Boulter Plywood
Okoume A/B BS1088 Lloyds Approved Quantity Discounts. Water & boil proof glue (WBP), Whole piece rotary cut face, Minimum 1.2mm face veneer thickness
Okoume Plywood - BS 1088 Joubert Marine Grade | Marine
Buy Okoume plywood online. High quality Okoume marine grade plywood by Joubert. Meets BS 1088 and Lloyd's Register Type Approved. Shipped nationwide
meranti bs1088 hydrotek 6mm 5 ply marine grade plywood 4
Our BS 1088 is Lloyds certified, the BS 6566 version allows slightly thinner veneers and some filled end splits in the faces, but the same void free core and WBP
BS 1088 - Wikipedia
In materials, BS 1088 is the British Standard specification for marine plywood that applies to plywood produced with untreated tropical hardwood veneers that have a set level of resistance to fungal attack. The plies are bonded with Weather Boil Proof (WBP) glue
BS 1088 (Hydrotek) – Midwest Boat Appeal & Marine Plywood
BS 1088 Hydrotek is a multi-ply marine plywood that is superior to all standard Meranti plywood currently produced. Both face and inner plies are constructed from whole piece, color matched, Meranti veneers. Hydrotek is used in boat building applications where only the best will do
Hydrotek, Meranti, Bs 1088 Rules 5 Ply 6mm x 4' x 8
Hydrotek Marine Plywood is manufactured utilizing BS 1088 specifications, it is a multiply type construction, with balanced internal plys and thick (1mm before
SF3235VPX1 Excavator Walk Bearing 330x260x35 Mm Video