| BA345-1 Excavator Bearing 345x470x54mm | Other Features:Deep Groove; Snap Ring:No; Brand:NTN; Bore:0.394 Inch | 10 Mill; Characteristic cage frequency, FTF:0.37 Hz; ra max:0.3 mm; Inch - Metric:Metric; Internal Special Features:No; f0:12.4; Characteristic outer ring frequency, BPF0:2.56 Hz; |
| EX300-3 Excavator Slewing Bearing 1249*1530*115mm | Seals:ZZ (Double Shield); Bearing Material:[Steel] Steel; Days to Ship:7 Days; RoHS:6; Type:Bearings with Housin; Bearing Used:Deep Groove Ball Bea; Volume Discount:Available; Flange Shape:Square Type; Shape:Flange Type; Flange O.D. H(φ):47; |
| BA230-7WSA Excavator Bearing 230x300x35mm | Characteristic outer ring frequency, BPF0:3.09 Hz; Ca min:8.54 mm; f0:13.3; rs min:3 mm; Nlim (grease):3,800 rpm; Dynamic load, C:133 kN; Max operating temperature, Tmax:110 °C; rNs min:0.5 mm; d:85 mm; Radial clearance class:CN; |
| Sumitomo SH60-1 Bearing | Oil Lubrication - M/N Seal:1500 rpm; Dimension B:6.47 in; Y2 - Geometry Factor:4.67; Weight:27 lb; Engineering Group:Mounted Bearing; Dimension F:10.83 in; Float:0.083 in; Y1 - Geometry Factor:3.14; Eng Internal Radial Clearance - Min:0.0037; Grease Lubrication - M/N Seal:1500 rpm; |
| 180BA-2256 Excavator Bearing 180x225x22mm | Basic Load Rating Cr(KN):10.9; Basic Load Rating Cor(KN):5.3; Unit Body Material:Aluminum; Surface Treatment:No; Shaft Dia. (mm)(φ):20; Pillow Type, Category:Lightweight; Days to Ship:Quote; Type of Insert Bearing:Cylindrical Bore Sha; Unit, Type:Insert Bearing Unit; Rolling Element Material:Stainless Steel; |
| SC2308 Excavator Bearing 114.2x158.7x22.15mm | Bearing Inner Dia. Shape:Cylindrical Bore Set; Unit, Type:Insert Bearing Unit; Accessory:No Cover; Fit:J7; Rolling Element Material:Bearing Steel; Surface Treatment:No; Unit Body Material:Cast Iron; Days to Ship:Quote; d:17; |
| BA345-1A Excavator Bearing / Angular Contact Bearing 345*470*45mm | da - Inner Ring Backing Diameter:77.700 mm; Contact Angle:15 º; Cage Type:CR - Phenolic Outer; Limiting Speed (Grease):14040 rpm; Ball Type:Ceramic; D:110 mm; Design Units:METRIC; C0 - Static Radial Rating:36220 N; Ce - Dynamic Radial Rating1:50300 N; do - Ball Diameter:11.906250 mm; |
| BA290-3 Excavator Bearing / Angular Contact Bearing 290*380*40mm | Bearing Retained:Yes (with retaining; Type:Bearings with Housin; Flange O.D. H(φ):47; Holder Surface Treatment:Clear Anodize; Housing Material:[Aluminum Alloy] 201; Width T(mm):25; Bearing Used:Deep Groove Ball Bea; Volume Discount:Available; Bearing I.D. d(mm):10; |