| No. | Brand | k | s | a | r | m | c | L | A |
| 24-6-10 | - | - | - | - | - | - | - | - | 25.5 mm |
| 20X32X7 | INA | - | - | - | - | - | - | - | 36 mm |
| 1304G15C3 | - | - | - | - | 1.5 | 8 mm | - | - | - |
| 4-TIS | - | - | - | - | - | - | - | - | - |
| 230g | - | - | - | - | - | - | - | - | - |
| 2 | - | - | - | - | - | - | - | 110 mm | - |
| 63052ZC3 | koyo | - | - | - | - | - | - | 197.5 mm | 54 mm |
| 12 | - | - | - | - | - | - | - | - | - |
| 0821000004 | Rexroth | - | - | - | - | - | - | - | - |
| 2.25 | INA | - | - | - | - | - | - | - | 60 mm |
| 80% | - | - | - | - | - | - | - | 80 mm | 29 mm |
| CB-FC25/CBFC32/CBFC40 | - | - | - | - | - | - | - | - | - |
| 3mm\6mm\12mm\16mm\17mm\18mm | - | - | - | - | - | - | - | 222 mm | 60 mm |
| 22324BD1 | NTN | - | - | - | - | - | - | - | - |
| 4 | - | - | - | - | - | - | - | - | 49 mm |
| 4X8 | - | - | - | - | - | - | - | - | - |
| ZSL19 | - | - | - | - | - | - | - | - | - |
| Parker-4V1-P4K-12AO-SS-PP-Bellows-Valve | Parker | - | - | - | - | - | - | - | - |
| 330B | - | - | - | - | - | - | - | - | - |
| CL2B-dB09 | - | - | - | - | - | - | - | 70 mm | 32.5 mm |
| FZR1000 | - | - | - | - | - | - | - | - | - |
| BA345-1A Excavator Bearing | Ab - Cage-Cone Frontface Clearance:0.06 in; Y1 - ISO Factor9:2.47; db - Cone Backface Backing Diameter:1.56 in; C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)3:4880 lbf; R - Cone Backface To Clear Radius1:0.080 in; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5:8500 lbf; K - Factor7:2.14; D:2.7500 in; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)4:32800 lbf; |
| BA230-3 Excavator Bearing 230x300x35mm | Type:Bearings with Housin; Shape:T-Shaped; Bearing Retained:No; Number of Bearings:Double; Height H(mm):40 ～ 90; RoHS:6; Bearing Material:[Steel] Steel; Holder Surface Treatment:Black Oxide Coating; |
| BA340-1SA Excavator Bearing / Angular Contact Bearing 340*440*52mm | S:14.3 mm; SW:3.18 mm; C1:4.3 mm; Weight:0.21 kg; T min.:-20 °C; d:23.81 mm; r:0.6; D:52 mm; B:34 mm; T max.:100 °C; |
| 29 mm x 53 mm x 37 mm PC400-5 Slewing Bearing | rs min:2 mm; Mass:1.07 kg; da min:59 mm; D:110 mm; Brand:NTN; Dynamic load, C:62 kN; ra max:2 mm; Max operating temperature, Tmax:120 °C; Min operating temperature, Tmin:-20 °C; Nlim (grease):6,400 rpm; Size (mm):29 mm x 53 mm x 37 mm ; |
| BA340-1A Excavator Bearing 340x440x52mm | Db - Cup Backface Backing Diameter:1.44 in; Series:17500; e - ISO Factor2:0.33; Y - ISO Factor3:1.81; r - Cup Backface To Clear Radius1:0.06 in; Da - Cup Frontface Backing Diameter:1.56 in; Design Units:Imperial; Cg - Geometry Factor:0.0423; Cup Part Number:17520; D:1.6875 in; |
| BA345-1BSA Excavator Bearing / Angular Contact Bearing 345x470x45mm | Dimension L:6.04 in; Shaft Tolerance:0.0015 in; Oil Lubrication - M/N Seal:2400 rpm; e - Geometry Factor:0.24; Y2 - Geometry Factor:4.23; Engineering Group:Mounted Bearing; Float:0.050 in; UPC Code:0883450049603; Full Timken Part Number:QATU10A050SB; Dimension D:4.75 in; |
| Sumitomo SH60-1 Bearing | Oil Lubrication - M/N Seal:1500 rpm; Dimension B:6.47 in; Y2 - Geometry Factor:4.67; Weight:27 lb; Engineering Group:Mounted Bearing; Dimension F:10.83 in; Float:0.083 in; Y1 - Geometry Factor:3.14; Eng Internal Radial Clearance - Min:0.0037; Grease Lubrication - M/N Seal:1500 rpm; |
| R210-3 Slewing Bearing For Excavating 1083*1328*111mm | Ab - Cage-Cone Frontface Clearance:1.5 mm; da - Cone Frontface Backing Diameter:32 mm; db - Cone Backface Backing Diameter:34.04 mm; G2 - Heat Generation Factor (Rib-Roller End):8; Cg - Geometry Factor:0.0598; G1 - Heat Generation Factor (Roller-Raceway):19.3; D:63.101 mm; Bearing Weight:0.4 Kg; Da - Cup Frontface Backing Diameter:59.44 mm; a - Effective Center Location3:-9.4 mm; |
BS 1088 (Hydrotek) – Midwest Boat Appeal & Marine Plywood
BS 1088 Hydrotek is a multi-ply marine plywood that is superior to all standard Meranti plywood currently produced. Both face and inner plies are constructed from whole piece, color matched, Meranti veneers. Hydrotek is used in boat building applications where only the best will do
meranti bs1088 hydrotek 6mm 5 ply marine grade plywood 4
Our BS 1088 is Lloyds certified, the BS 6566 version allows slightly thinner veneers and some filled end splits in the faces, but the same void free core and WBP
Hydrotek, Meranti, Bs 1088 Rules 5 Ply 6mm x 4' x 8
Hydrotek Marine Plywood is manufactured utilizing BS 1088 specifications, it is a multiply type construction, with balanced internal plys and thick (1mm before
Okoume Plywood - BS 1088 Joubert Marine Grade | Marine
Buy Okoume plywood online. High quality Okoume marine grade plywood by Joubert. Meets BS 1088 and Lloyd's Register Type Approved. Shipped nationwide
BS 1088 - Wikipedia
In materials, BS 1088 is the British Standard specification for marine plywood that applies to plywood produced with untreated tropical hardwood veneers that have a set level of resistance to fungal attack. The plies are bonded with Weather Boil Proof (WBP) glue
Okoume Marine Plywood: BS 1088 Quality - 3mm, 4mm, 6mm
4mm, 5/32", 13 lbs, 3, BS1088. 6mm, 1/4", 21 lbs, 5, BS1088. 9mm, 3/8", 31 lbs, 5, BS1088. 12mm, 1/2", 42 lbs, 7, BS1088. 18mm, 3/4", 62 lbs, 11, BS1088
Marine Plywood - Boulter Plywood
Okoume A/B BS1088 Lloyds Approved Quantity Discounts. Water & boil proof glue (WBP), Whole piece rotary cut face, Minimum 1.2mm face veneer thickness
BA290-3A Excavator Bearing Video