| CR2256 Excavator Bearing 110x150x20.5mm | Note:This product line wa; Dimension N:10.875 in; Dimension V:0.1 in; Shaft Size:3-15/16 in; Cr - Dynamic Load Rating:87226 lbf; Series Type:Medium Series; Seal Type:Felt Seal; Bolt Size:4 x M16; Support Type:Round Flange; Dimension R:13.1 in; |
| High Precision BA260-3A 260*340*38mm Excavator Bearing | Category:Bearings; d:55 mm; Nlim (oil):6,600 rpm; Minimum Buy Quantity:N/A; Brand:NTN; Manufacturer Name:NTN; Characteristic cage frequency, FTF:0.42 Hz; Max operating temperature, Tmax:120 °C; rs min:1.5 mm; r1s min:1.1 mm; |
| SF 4852 PX1#CA Excavator Bearing 240x310x33mm | Max operating temperature, Tmax:110 °C; ra max:2 mm; Category:Single Row Ball Bear; Enclosure:2 Seals; Da max:189 mm; da min:121 mm; Internal Clearance:C0-Medium; Bore:4.331 Inch | 110 Mil; Min operating temperature, Tmin:-25 °C; Outside Diameter:7.874 Inch | 200 Mil; |
| BA222-1WSA Excavator Bearing 222x273x26mm | Seals:DD (Contact Rubber S; Flange O.D. H(φ):104; Shape:Flange Type; Days to Ship:8 Days; Bearing Retained:No; Width T(mm):50 ～ 120; Type:Bearings with Housin; Holder Surface Treatment:Electroless Nickel P; |
| AC463240 Excavator Bearing Angular Contact Ball Bearing 230X320X40mm | SW:3.97 mm; B1:51.1 mm; C0:15.2 kN; B2:17.5 mm; d:31.75 mm; C1:5.8 mm; D:72 mm; m:6.5 mm; C:20 mm; d1:51.1 mm; |
| SF4815 Excavator Bearing / Angular Contact Bearing 240*310*33mm | Series Type:Light Series; Bearing UPC:013992026699; Dimension H:3.6 in; Bolt Size:4 x M16; Bearing Number:LSE403BX; Note:This product line wa; Dimension P:0.9 in; Dimension L:6.4 in; Dimension T:15.0 in; Dimension R:13.1 in; |
| SF6015 Excavator Bearing 300x372x36mm | N:16mm; A2:35.5 mm; A1:13 mm; s1:13.5 mm; d:23.81 mm; Dz:60 mm; A:27 mm; H:130 mm; B:27 mm; G:M6x1; |
| BA152-2036 Excavator Bearing 152x203x26mm | C1 - Dynamic Radial Rating (1 million revolutions)6:102000 lbf; Ab - Cage-Cone Frontface Clearance:0.11 in; Design Units:Imperial; G2 - Heat Generation Factor (Rib-Roller End):68.5; B - Cone Width:1.875 in; a - Effective Center Location4:0.09 in; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:22000 lbf; Cage Type:Stamped Steel; K - Factor8:1.2; Cone Part Number:74550P; |