| AC423040-1 Excavator Bearing 210x300x40mm | Dz:60 mm; C0:7.88 kN; A1:13 mm; S:14.3 mm; Designation of housing:F205N-; Recommended tightening torque for set screw:5.5 Nm; G:M6x1; C:14 kN; N:12mm; B:34 mm; |
| Slewing Ring For Excavator EX400-3 1249*1530*115mm | L:70 mm; H2:64 mm; B:34 mm; A1:20 mm; T min.:-40 °C; Designation of bearing:EX202G2T04; A:38 mm; d1:32.4 mm; G:M6x1; E:16 mm; |
| JMZC AC423040-1 EXCAVATOR BEARINGS 210x300x40mm | Dimension SV:5.82 in; Dimension L:6.03 in; Dimension B:11.01 in; Grease Lubrication - M/N Seal:650 rpm; Bearing Number:22228; Engineering Group:Mounted Bearing; Dimension RV:0.05 in; UPC Code:0883450088411; Float:0.083 in; Grease Lubrication - T Seal:900 rpm; |
| Sumitomo SH220-3 Bearing | Symbols of Lubrication Amount:No; Outer Ring:With Outer Ring; O.D.(Ø):120; Specifications:Standard; Retainer Type:Momi removing; Special Configurations Code:No; Rolling Element Material:Steel; Low Torque Specification:No; Clearance sign:No; |
| SF4852PX1 Excavator Bearing / Angular Contact Ball Bearing 240x310x33mm | d:10.2500 in; a - Effective Center Location4:-0.37 in; Design Units:Imperial; B - Cone Width:3.1406 in; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:49700 lbf; Aa - Cage-Cone Backface Clearance:0.48 in; C90 - Dynamic Radial Rating (90 million revolutions)5:87400 lbf; K - Factor8:1.76; R - Cone Backface To Clear Radius3:0.270 in; G2 - Heat Generation Factor (Rib-Roller End):147.8; |
| Excavator Travel Bearing BA180-4WSA 180x250x33mm | Seal:Nitrile; Unit, Type:Insert Bearing Unit; Surface Treatment:No; d:75; Bearing Inner Dia. Shape:Tapered hole adapter; Rolling Element Material:Bearing Steel; Bearing Unit, Type:Take-Up Type; Diameter series symbol:For Heavy Load; RoHS:6; |
| 150BA20V-2 Bearing 150×200×24mm | dc min:61 mm; Min operating temperature, Tmin:-20 °C; Category:Bearings; Inventory:0.0; B:19 mm; Characteristic outer ring frequency, BPF0:6.24 Hz; d1:58.9 mm; da max:54 mm; Brand:NTN; r1s min:1.1 mm; |
| 10 mm x 30 mm x 14.3 mm SF4444VPX1 Excavator Bearing 220x295x32mm | Dz:46 mm; d1:27.2 mm; Recommended tightening torque for set screw:5.5 Nm; L:100 mm; d:12 mm; J:78 mm; C:9.55 kN; A1:6 mm; A:25.5 mm; B1:28.6 mm; Size (mm):10 mm x 30 mm x 14.3 mm ; |