| BA180-4 Excavator Slewing Bearings 180mm*250mm*33mm | Inside Ring Width B:=Bearings1_Inside Ri; Bearing Number:G1114KRRB; Dimension L1:66.7 mm; Bolt Hole Spacing J:158.00 mm; Weight:8.841 lb; Total Length L:200.00 mm; Inside Ring Outside Diameter:0.720 in; Dimension B1:2.469 in; Static Load Rating:5210 lbf; Shaft Size d:1 7/8 in; |
| BA280-2A Excavator Bearing 280x370x40mm | L:162 mm; J:130 mm; T max.:200 °C; Recommended tightening torque for set screw:22 Nm; B:45.3 mm; A2:64.5 mm; C0:29.2 kN; d:55 mm; T min.:-20 °C; Dz:110 mm; |
| AC4630 Excavator Walk Bearing 230x300x35mm | C0:15.2 kN; T min.:-20 °C; T max.:100 °C; Designation of bearing:UC306-18G2L3; Weight:1.28 kg; A:28 mm; H:100 mm; s1:21.5 mm; A3:2.5 mm; G:M6x1; |
| BA240-3ASA /BA240-3 Excavator Bearing M-anufacturer 240x310x33.5mm | Precision:Grade 0; D:140; Rolling Element Material:Steel; Type:Ball; Days to Ship:9 Days or more; Outer Ring Shape:Flat; Inner/Outer Ring Material:Steel; B:26; Basic Dynamic Load Rating(N):72500; Types:16**/6*** series; |
| R196Z-4 Excavator Walk Bearing 196.85x241.3x12mm | Shape:Flange Type; Days to Ship:8 Days; Number of Bearings:Double; Flange O.D. H(φ):77; Bearing Retained:No; Type:Bearings with Housin; RoHS:6; Bearing Part Number:6806; Holder Surface Treatment:Black Oxide Coating; Flange Shape:Round Type; |
| BD222-1a Excavator Bearing / Angular Contact Bearing 222*273*50mm | Max operating temperature, Tmax:120 °C; Y0:0.93; Characteristic inner ring frequency, BPFI:10.74 Hz; Fatigue limit load, Cu:11.8 kN; Characteristic cage frequency, FTF:0.44 Hz; Min operating temperature, Tmin:-40 °C; Brand:NTN; Category:Roller Bearings; Nlim (grease):3,700 rpm; Weight / Kilogram:0; |
| HD250-7 Kato Excavator Accessories Bearing | Grease Lubrication - B/C/O Seal:1000 rpm; Dimension B:7.69 in; Shaft Size :3-7/16 in; Pre Install Clearance Max:0.0039 in; Bearing Number:22218; Full Timken Part Number:QAPL18A307SB; Dimension D Min:9.25 in; Y1 - Geometry Factor:2.90; Y2 - Geometry Factor:4.31; Dimension SA:4.03 in; |
| AC463240 Excavator Bearings M-anufacturer 230x320x40mm | Nlim (grease):7,800 rpm; ra max:1.5 mm; Static load, C0:24 kN; Mass:0.63 kg; Characteristic cage frequency, FTF:0.38 Hz; D:90 mm; Characteristic rolling element frequency, BSF:4.08 Hz; d:40 mm; Min operating temperature, Tmin:-20 °C; Dynamic load, C:40.5 kN; |