| High Quality BA222-1WSA 222*273*26mm Excavator Bearing | A1:9 mm; C0:15.2 kN; Weight:1.58 kg; Designation of housing:FC207-; A:34 mm; e:11 mm; T min.:-20 °C; A4:26 mm; Designation of bearing:US207-22G2; T max.:100 °C; |
| BA220-6A Excavator Bearing 220x276x26mm | Nlim (grease):5,500 rpm; e:0.35; Characteristic outer ring frequency, BPF0:10.84 Hz; ra max:1.5 mm; Min operating temperature, Tmin:-40 °C; a:11.9 mm; Y0:0.95; d1:52.5 mm; Characteristic cage frequency, FTF:0.45 Hz; Static load, C0:33.5 kN; |
| 180BN19 Excavator Bearing 180x250x33mm | Type:Bearings with Housin; Bearing Used:Deep Groove Ball Bea; Bearing Part Number:6804; Number of Bearings:Single; Holder Surface Treatment:Clear Anodize; Seals:ZZ (Double Shield); Width T(mm):12; Bearing I.D. d(mm):20; Shape:Flanged Pilot Type; |
| BA220-6A Excavator Bearings M-anufacturer 220x276x26mm | static load capacity:95000 N; flanges:(2) Outer; Bore:2.756 Inch | 70 Mill; bearing material:Hardened Alloy Steel; closure type:Open; Profile:Complete with Outer; Fatigue limit load, Cu:11.6 kN; da max:82 mm; Inventory:0.0; cage material:High Strength Machin; |
| Excavator Bearing SF4860PX1 | Revolution Frequency(rpm):3600; High-Speed Steel:Standard; Cylinder shape (suffix symbol: X):No; Inner/Outer Ring Material:Steel; Rolling Element Material:Steel; Shaft Bore Config.:Cylindrical Bore; B:37; Days to Ship:9 Days or more; Basic Load Rating, Dynamic Rating(N):182000; |
| 250BA36 Excavator Bearing / Angular Contact Bearing 250x360x44mm | Unit Body Material:Cast Iron; Surface Treatment:No; Lubrication method:Oil Supply Type; Unit, Type:Bearing unit; Rolling Element Material:Steel; Bearing Unit, Type:Square flange shape; Basic Dynamic Load Rating Cr(N):113000; |
| Slewing Bearing For Excavator HD820-3 1080*1320*95mm | C:52.5 kN; L1:50 mm; N:M16; Designation of bearing:US212G2T04; J:105 mm; E:25 mm; H:69.8 mm; B:53.7 mm; G:M6x1; Designation of housing:PG212-; |
| R210-3 Slewing Bearing For Excavating 1083*1328*111mm | Ab - Cage-Cone Frontface Clearance:1.5 mm; da - Cone Frontface Backing Diameter:32 mm; db - Cone Backface Backing Diameter:34.04 mm; G2 - Heat Generation Factor (Rib-Roller End):8; Cg - Geometry Factor:0.0598; G1 - Heat Generation Factor (Roller-Raceway):19.3; D:63.101 mm; Bearing Weight:0.4 Kg; Da - Cup Frontface Backing Diameter:59.44 mm; a - Effective Center Location3:-9.4 mm; |