| AC423040-1 EXCAVATOR BEARINGS 210x300x40mm | f0:14.4; d:65 mm; Mass:0.99 kg; Characteristic rolling element frequency, BSF:5.37 Hz; Characteristic cage frequency, FTF:0.41 Hz; Radial clearance class:CN; Characteristic outer ring frequency, BPF0:4.1 Hz; Min operating temperature, Tmin:-20 °C; da min:73 mm; ra max:1.5 mm; |
| BD110-1SB Excavator Bearing 110x140x28mm | A2:56.7 mm; S:11 mm; A1:13 mm; C:31.85 kN; A:40 mm; Designation of housing:FE209-; Recommended tightening torque for set screw:11.5 Nm; J:105 mm; e:24 mm; N:14mm; |
| High Quality 184BA-2251 184*226*21mm Excavator Bearing | Characteristic inner ring frequency, BPFI:4.43 Hz; ra max:0.3 mm; Da max:24 mm; Max operating temperature, Tmax:120 °C; Nref:28,000 rpm; Fatigue limit load, Cu:0.13 kN; f0:12.4; Characteristic rolling element frequency, BSF:3.52 Hz; Characteristic outer ring frequency, BPF0:2.57 Hz; da min:12 mm; |
| High Quality BA120-7 Walking Bearing For Excavator | Designation of open end cover:SCOU207-21; S:17.5 mm; B:42.9 mm; C0:15.2 kN; A:34 mm; G:M6x1; A2:44.4 mm; Weight:1.26 kg; e:19 mm; T min.:-40 °C; |
| BA120-16AS Excavator Bearing 260x340x38mm | Db - Cup Backface Backing Diameter:3.82 in; C - Cup Width:1.4200 in; Design Units:Imperial; Cg - Geometry Factor:0.108; Da - Cup Frontface Backing Diameter:4.25 in; Cup Part Number:HH506310; e - ISO Factor2:0.4; Y - ISO Factor3:1.49; D:4.5000 in; Series:HH506300; |
| 200BA27V-2 Excavator Bearing 200x270x33mm | Shape:Flanged Pilot Type; Volume Discount:Available; Bearing I.D. d(mm):6; Number of Bearings:Double; RoHS:6; Bearing Retained:No; Bearing Used:Deep Groove Ball Bea; Type:Bearings with Housin; |
| AC4630 Excavator Walk Bearing 230x300x35mm | Ab - Cage-Cone Frontface Clearance:9.9 mm; e - ISO Factor8:0.73; Aa - Cage-Cone Backface Clearance:20.1 mm; Series:HH932100; Cone Part Number:HH932145; Design Units:Imperial; D:311.15 mm; d:146.050 mm; Cg - Geometry Factor:0.133; K - Factor7:0.8; |
| BD200-6 Excavator Bearing / Angular Contact Bearing 200*255*32mm | Number of Bearings:Single; Bearing Retained:Yes (with retaining; Seals:DD (Contact Rubber S; Width T(mm):31; Bearing I.D. d(mm):15; Bearing Used:Deep Groove Ball Bea; Shape:L-Shaped; Type:Bearings with Housin; |