| No. | Brand | k | s | a | r | m | c | L | A |
| 334 | - | - | - | - | - | - | - | - | - |
| 10-52-10+Te | - | - | - | - | - | - | - | 100 mm | - |
| (OP14-015) | - | - | - | - | - | - | - | - | - |
| 4 | - | - | - | - | - | - | - | - | - |
| MR85-2RS | - | - | - | 11.9 mm | - | - | - | - | - |
| 2020 | - | - | - | - | - | - | - | - | - |
| 520 | NTN | - | - | - | - | - | - | - | - |
| 4mm | - | - | - | - | - | - | - | - | - |
| E0/E1 | - | - | - | - | - | - | - | - | - |
| DH500LC-7,M325C,M325MH,M322C,M318C,385C | - | - | - | - | - | - | - | - | - |
| 6001ZZC3 | NSK | - | - | - | - | - | - | - | - |
| RKS.062.25.1204 | - | - | - | - | - | - | - | - | - |
| EFBG-06-250 | YUKEN | - | - | - | - | - | - | - | - |
| 50 | - | - | - | - | - | - | - | - | - |
| KD11786Y | Timken | - | - | - | - | - | - | - | - |
| EX220-1 | - | - | - | - | - | - | - | - | 32.1 mm |
| 2x | TRW | - | - | - | - | - | - | 80 mm | - |
| (5 | - | - | - | - | - | - | - | - | - |
| 22348 | - | - | - | - | - | - | - | - | - |
| 2 | Thomson | - | - | - | - | - | - | - | - |
| SF 4852 PX1#CA Excavator Bearing 240x310x33mm | Max operating temperature, Tmax:110 °C; ra max:2 mm; Category:Single Row Ball Bear; Enclosure:2 Seals; Da max:189 mm; da min:121 mm; Internal Clearance:C0-Medium; Bore:4.331 Inch | 110 Mil; Min operating temperature, Tmin:-25 °C; Outside Diameter:7.874 Inch | 200 Mil; |
| BA120-16 Excavator Bearing / Angular Contact Bearing 120x165x22mm | J:92 mm; A:36 mm; d1:51.1 mm; T min.:-20 °C; G:R1/8"; T max.:100 °C; L:118 mm; B1:51.1 mm; S:18.8 mm; s1:36.3 mm; |
| BA240-3ASA Excavator Walk Bearing 240x310x33.5 Mm | Db - Cup Backface Backing Diameter:8.86 in; Series:81000; D:9.6250 in; C - Cup Width:1.3125 in; Cg - Geometry Factor:0.125; Design Units:Imperial; r - Cup Backface To Clear Radius1:0.130 in; Cup Part Number:81962; Da - Cup Frontface Backing Diameter:9.06 in; Y - ISO Factor3:1.71; |
| Excavator Bearings HS05145 117x145x14mm | A2:41 mm; C0:11.2 kN; A1:12 mm; J:116.5 mm; C:19.5 kN; S:8 mm; A:32.1 mm; d:30 mm; G:R1/8"; Designation of housing:FLE206-; |
| AC4631 Excavator Bearing 300x370x33mm | Rolling Element Material:Bearing Steel; Unit, Type:Insert Bearing Unit; Stroke:No; Pillow Type, Category:Standard; Unit Body Material:Cast Iron; Surface Treatment:No; Basic Load Rating, Dynamic Rating(N):84000; |
| BA230-2 Excavator Bearing 230x320x40mm | db - Cone Backface Backing Diameter:292.10 mm; D:431.724 mm; da - Cone Frontface Backing Diameter:284.99 mm; Bearing Weight:42.20 Kg; Cup Part Number:HM252315; B:82.550 mm; a - Effective Center Location3:-9.4 mm; Series:HM252300; Da - Cup Frontface Backing Diameter:398.30 mm; Ab - Cage-Cone Frontface Clearance:6.1 mm; |
| SF3607 Excavator Walk Bearing | B:23.813 mm; R - Cone Backface To Clear Radius1:2.290 mm; Db - Cup Backface Backing Diameter:60.96 mm; G1 - Heat Generation Factor (Roller-Raceway):23.6; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2280 lbf; C90 - Dynamic Radial Rating (90 million revolutions)4:4880 lbf; a - Effective Center Location3:-8.6 mm; r - Cup Backface To Clear Radius2:1.27 mm; K - Factor7:2.14; Cage Type:Stamped Steel; |
| Hyundai R110-7 Bearing | D3:560 mm; L:361.00 mm; Appropriate Hydraulic Nut:HMV88; Weight:118.00 Kg; Lockwasher and Lockplates:MS 3188; C11:90.00 mm; Locknut:HM3188; C:70 mm; Thread G:Tr440x5; d1:410.00 mm; |
FAG | 6210-M-C3 | Applied
Shop FAG 6210-M-C3 at Applied.com, which includes; Deep Groove Ball Bearing, 50 mm ID, 90 mm OD,20 mm Width
6210 FAG (6210 ) Deep Grooved Ball Bearing Open
6210 FAG (6210 ) Deep Grooved Ball Bearing Open 50x90x20 ... Brand: FAG Measurement Unit: Metric Inside Diameter: 50.00mm. Outside Diameter: 90.00mm
6210 FAG Open Deep Groove Ball Bearing 50x90x20mm
6210 FAG Open Deep Groove Ball Bearing 50x90x20mm - Single row deep groove ball bearing 50mm inside x 90mm outside x 20mm width, also know as
FAG | 6210-C3 | Light 6200 Series Deep Groove Ball Bearing
Shop FAG 6210-C3 at Applied.com, which includes; Deep Groove Bearing Type, 50 mm Inner Diameter, 90 mm Outer Diameter, 20 mm Width
FAG (Schaeffler) - 6210-C3 - Motion Industries
Radial/Deep Groove Ball Bearing - Round Bore, 50 mm ID, 90 mm OD, 20 mm Width, Open, Internal Clearance: C3. Deep groove ball bearings are versatile, self-retaining bearings with solid outer rings, inner rings and ball and cage assemblies. ... Radial/Deep Groove Ball Bearing - Round
FAG 6210-C3 Deep Groove Ball Bearing, Single Row, Open
FAG 6210-C3 Deep Groove Ball Bearing, Single Row, Open, Steel Cage, C3 Clearance, Metric, Metric, 50mm ID, 90mm OD, 20mm Width, 18000rpm Maximum
Deep groove ball bearings - 6210 - medias - Schaeffler
Deep groove ball bearings 6210, main dimensions to DIN 625-1. Radial load Axial load in one direction Axial load in two directions Not sealed Grease
50 mm x 90 mm x 20 mm BA246-2A Excavator Bearings M-anufacturer 246x313x32mm Video