| BA230-7A Excavator Bearing 230x300x32mm | Type:Bearings with Housin; RoHS:6; Shape:Flange Type; Bearing Retained:Yes (with retaining; Bearing Used:Deep Groove Ball Bea; Volume Discount:Available; Housing Material:1045 Carbon Steel; Days to Ship:7 Days; Bearing Part Number:6203; |
| PS210 Samsung Excavator Accessories Bearing | Lubrication Groove g:25.3 mm; DUR/DOR F/E:847.000 mm; Width B:770.000 mm; Bore d:770.000 mm; Backing Housing Diameter Ds:1003.0 mm; Outer-Ring Set:847RXS3151; Angle of Chamfer r1smin:20º; Dynamic Load Rating C11:62800 kN; Inner-Ring Set:770ARXS3151; Weight:3648.610 lb; |
| BA205-1 Excavator Walk Bearing 205x295x40mm | Characteristic outer ring frequency, BPF0:7.82 Hz; Brand:NTN; Characteristic rolling element frequency, BSF:7.23 Hz; Y2:1.49; d:38.1 mm; Mass:0.33 kg; Y0:0.82; Characteristic cage frequency, FTF:0.43 Hz; Characteristic inner ring frequency, BPFI:10.18 Hz; Nlim (grease):5,300 rpm; |
| High Quality BA260-3A 260*340*38mm Excavator Bearing | Stroke:No; Pillow Type, Category:Standard; Machining:Oil-free type; Basic Load Rating, Dynamic Rating(N):29100; d:40; Unit, Type:Insert Bearing Unit; Seal:Silicone; Accessory:No Cover; Rolling Element Material:Bearing Steel; |
| Excavator Travel Bearing AC4630 230x300x35mm | Bearing Used:Deep Groove Ball Bea; Seals:DD (Contact Rubber S; Width T(mm):16; Bearing Retained:Yes (with retaining; Volume Discount:Available; Type:Bearings with Housin; Shape:Flange Type; Holder Surface Treatment:Black Oxide Coating; |
| BA270-3SA Excavator Bearing 270x350x40mm | Outer Ring:With Outer Ring; Rolling Element Material:[Steel] Steel; Type:Angular Contact Ball; Seal, Shield Symbols:No; Specifications, Environment:Standard; Outer Ring Shape:Flat; Inner/Outer Ring Material:[Steel] Steel; Preload Mark:No; Days to Ship:Quote; Bearing Style:Open Type; |
| Excavator Bearing AC6037-1 | D:85 mm; Weight:0.75 kg; C0:20.8 kN; C1:6.5 mm; G:5/16-24UNF; d:41.28 mm; T max.:100 °C; SW:3.97 mm; S:10.2 mm; C:19 mm; |
| HS05145 Excavator Bearing 117x145x14mm | s1:19.05 mm; L:80 mm; A1:12 mm; B:38.1 mm; C0:11.2 kN; N:11,5mm; Recommended tightening torque for set screw:3.7 Nm; S:15.9 mm; T min.:-20 °C; Designation of bearing:UC206-18G2L4; |