| No. | Brand | k | s | a | r | m | c | L | A |
| 820X2040X2.7mm | - | - | - | - | - | - | - | - | - |
| 18.7 | - | - | - | - | - | - | - | - | - |
| 3X7 | - | - | - | - | - | - | - | - | - |
| 1049 | - | - | - | - | - | - | - | 125 mm | - |
| 22220EM | - | - | - | - | - | - | - | - | - |
| 6205 | FAFNIR | - | - | - | - | - | - | 134 mm | - |
| (HB020) | - | - | - | - | - | - | - | - | - |
| 8mm | - | - | - | - | - | - | - | - | - |
| Cartridge(250g), | - | - | - | - | - | - | - | - | - |
| 003371002 | Parker | - | - | - | - | - | - | - | - |
| 1100X1100 | INA | - | - | - | - | - | - | - | - |
| 3318 | - | - | - | - | - | - | - | - | - |
| 6201-2ZNR | - | - | - | - | - | - | - | - | - |
| BM6 | - | - | - | - | - | - | - | - | - |
| 90% | - | - | - | - | - | - | - | - | - |
| 22319MB | - | - | - | - | - | - | - | - | - |
| 4x8x3mm | - | - | - | - | - | - | - | - | - |
| 30tons | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 334 | - | - | - | - | - | - | - | - | - |
| OMR375 | - | - | - | - | - | - | - | - | - |
| 600 | fag | - | - | - | - | - | - | - | - |
| BA340-1A Excavator Bearing 340x440x52mm | Db - Cup Backface Backing Diameter:1.44 in; Series:17500; e - ISO Factor2:0.33; Y - ISO Factor3:1.81; r - Cup Backface To Clear Radius1:0.06 in; Da - Cup Frontface Backing Diameter:1.56 in; Design Units:Imperial; Cg - Geometry Factor:0.0423; Cup Part Number:17520; D:1.6875 in; |
| 633418 Excavator Bearing / Angular Contact Bearing 160x200x20mm | A1:15 mm; C0:15.2 kN; Recommended tightening torque for set screw:3.7 Nm; A4:24 mm; H3:90; T max.:100 °C; B:43 mm; Weight:1.86 kg; S:17 mm; L:125 mm; |
| High Quality AC463240 230*320*40mm Excavator Bearing | Fw:19 mm; C0r:17 kN; Ew:25 mm; Bc:15.8 mm; Brand:NTN; Max operating temperature, Tmax:120 °C; b:15.8 mm; Min operating temperature, Tmin:-20 °C; Mass:0.02 kg; Cr:14.3 kN; |
| BA205-1TII Excavator Bearing 205x295x41mm | Surface Treatment:No; Rolling Element Material:Bearing Steel; Unit Body Material:Cast Iron; RoHS:6; Fit:J7; Seal:Triple seals; Bearing Unit, Type:Take-Up Type; Basic Load Rating, Static Rating(N):53000; |
| 40 mm x 80 mm x 40 mm BD130-1SA Excavator Bearing 130x166x34mm | RoHS:6; Bearing Used:Deep Groove Ball Bea; Bearing I.D. d(mm):10; Holder Surface Treatment:Clear Anodize; Seals:VV (Non-Contact Rubb; Housing Material:[Aluminum Alloy] 201; Bearing Retained:Yes (with retaining; Width T(mm):25; Number of Bearings:Double; Type:Bearings with Housin; Size (mm):40 mm x 80 mm x 40 mm ; |
| BA280-2SA Excavator Bearings M-anufacturer 280x370x40mm | D - Bearing O.D.:1.6250 in; Oil Holes in Retainer:Yes; R - Fillet Radius Shaft (Max):0.03 in; d - Bore Diameter:0.7600 in; B:0.5310 in; Weight:0.2 lb; Steering Pivot Rating:2500 lbf; Bearing Type:Thrust Tapered Rolle; |
| 2B-SF4460PX1 Excavator Bearing / Angular Contact Bearing 300x372x36mm | B:52 mm; F:170 mm; da min:159 mm; Brand:NTN; Precision class:P0; d:150 mm; rs min:2 mm; Lubrication hole on inner ring:Non/No; ras max:2 mm; t:3 mm; |
| SF4019PX1/SF4019VPX1 Excavator Bearing Factory 200x260x30mm | C:52.5 kN; T min.:-20 °C; L1:32 mm; S:25.4 mm; L:150 mm; N:M16; J:118 mm; B:65.1 mm; Recommended tightening torque for set screw:16.8 Nm; H1:16 mm; |
BD175-6SA Excavator Bearing 175x218x40mm Video